Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Custom & Modified Register: for those with Modifed Minors and/or more radical Customised cars.

Moderator: Moderators

fixwheelmad
Minor Friendly
Posts: 94
Joined: Tue Jan 16, 2018 2:53 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby fixwheelmad » Mon Nov 12, 2018 4:54 pm

Update, completed one complete underside, now to flip over and sort the other side , then the boot and inner wings. Really enjoying my time off.
Attachments
A346D42B-D19B-44CB-A113-3AEF1B772A1F.jpeg
A346D42B-D19B-44CB-A113-3AEF1B772A1F.jpeg (2.55 MiB) Viewed 1018 times
32712F99-8866-4440-A2DC-8A20BB58A2F8.jpeg
32712F99-8866-4440-A2DC-8A20BB58A2F8.jpeg (2.58 MiB) Viewed 1018 times
2CF1A518-A28F-46D2-B6EA-CFDAF7975F54.jpeg
2CF1A518-A28F-46D2-B6EA-CFDAF7975F54.jpeg (2.58 MiB) Viewed 1018 times
60F0BBBF-1413-4999-81EB-CF532F2E278A.jpeg
60F0BBBF-1413-4999-81EB-CF532F2E278A.jpeg (2.15 MiB) Viewed 1018 times
86BEBD93-E3A8-449F-9627-AE6C7475084A.jpeg
86BEBD93-E3A8-449F-9627-AE6C7475084A.jpeg (2.75 MiB) Viewed 1018 times

fixwheelmad
Minor Friendly
Posts: 94
Joined: Tue Jan 16, 2018 2:53 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby fixwheelmad » Fri Nov 16, 2018 7:28 pm

A little update and somewhat a diversion, being building a solar furnace heater out of beer cans, and heating the workshop for free
Attachments
EA7B73D9-F90A-437E-B2C1-F6253D78E11C.jpeg
EA7B73D9-F90A-437E-B2C1-F6253D78E11C.jpeg (3.14 MiB) Viewed 981 times
B427987B-A29D-4AFC-A215-1F88D10004BE.jpeg
B427987B-A29D-4AFC-A215-1F88D10004BE.jpeg (4.4 MiB) Viewed 981 times
E8E32702-697E-4E62-9370-0C972CB512B6.jpeg
E8E32702-697E-4E62-9370-0C972CB512B6.jpeg (3.63 MiB) Viewed 981 times
820907B2-DADD-4465-8243-4C521BCD0CED.jpeg
820907B2-DADD-4465-8243-4C521BCD0CED.jpeg (2.77 MiB) Viewed 981 times
3FE92CA7-5BB7-4970-BBC9-E2553E17FE74.jpeg
3FE92CA7-5BB7-4970-BBC9-E2553E17FE74.jpeg (3.65 MiB) Viewed 981 times

TDV102
Minor Addict
Posts: 622
Joined: Fri Oct 16, 2015 5:16 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby TDV102 » Sat Nov 17, 2018 12:56 pm

Nice creation, but Kronenburg?
Good home offered for custom splittie

pgp001
Minor Fan
Posts: 227
Joined: Sun Aug 27, 2017 6:05 pm
MMOC Member: Yes

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby pgp001 » Sat Nov 17, 2018 6:08 pm

Can you give us a bit more detail about the operating principle of your heat exchanger please.

Thanks
Phil

fixwheelmad
Minor Friendly
Posts: 94
Joined: Tue Jan 16, 2018 2:53 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby fixwheelmad » Mon Nov 19, 2018 10:37 am

pgp001 wrote:
Sat Nov 17, 2018 6:08 pm
Can you give us a bit more detail about the operating principle of your heat exchanger please.

Thanks
Phil
Simple, it’s a passive heater, two plenum, connected by cans. Cold air enter low chamber, heats up and rises to top chamber, then extracted out, you can use a passive movement,but I intend to use a in line 12v motor fan powered by a small PV panel. As a rule, what goes in, ambient temp of room, should double, thats the physics, need to hand on the south facing roof next week to try. Look them up, this is tiny, some are the size of a whole house. Reckon that, my wood stove and the PV electric panels and batteries, should heat and light my unit for nothing. Thank a for interest.

fixwheelmad
Minor Friendly
Posts: 94
Joined: Tue Jan 16, 2018 2:53 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby fixwheelmad » Mon Nov 19, 2018 10:38 am

pgp001 wrote:
Sat Nov 17, 2018 6:08 pm
Can you give us a bit more detail about the operating principle of your heat exchanger please.

Thanks
Phil
What ever floats ya boat, gin bottles just don’t cut it

pgp001
Minor Fan
Posts: 227
Joined: Sun Aug 27, 2017 6:05 pm
MMOC Member: Yes

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby pgp001 » Mon Nov 19, 2018 1:05 pm

I saw something similar that uses two old central heating radiators, one mounted outside on a south facing wall and the other slightly higher on the inside of the same wall. the outer one heats up with the sun on it and the heated water inside rises and flows into the the internal radiator.

I dont think a pump is required as it works on the thermo syphon principle, a bit like my old Austin 7 cooling system with no pump.

Phil

irmscher
Minor Legend
Posts: 3541
Joined: Wed Jul 14, 2010 10:53 am
MMOC Member: Yes

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby irmscher » Wed Feb 06, 2019 11:10 pm

Have you given up on the car ?

fixwheelmad
Minor Friendly
Posts: 94
Joined: Tue Jan 16, 2018 2:53 pm
MMOC Member: No

Re: Newbie, Fiat TC & Volumex HFO 501 NEW BUILD 2018

Postby fixwheelmad » Mon Apr 22, 2019 10:10 am

Update, after being made redundant and enjoying nearly four months off, I’ve got a new job and now ploughed back into the build. All the floor is now complete, thankgod. Taken a lot of energy, now inner front wings, pedal box, rear out side quarters and the wheel arches replaced. Going to order the rotisserie now most the work is done. The main bit to sort is the remainder of the roll cage, bracing at the rear towers and the seat box section, again all in zinged and drilled and dimpled. A few photos.
Attachments
2A282AA9-A42E-41A9-AA53-0B9B6456EBE7.jpeg
2A282AA9-A42E-41A9-AA53-0B9B6456EBE7.jpeg (2.31 MiB) Viewed 4 times
4ABEFEFD-77BE-4225-A109-6E7DBA18B4E0.jpeg
4ABEFEFD-77BE-4225-A109-6E7DBA18B4E0.jpeg (2.59 MiB) Viewed 4 times
99008F6D-F0A9-4062-ACF2-3BA7C12C780C.jpeg
99008F6D-F0A9-4062-ACF2-3BA7C12C780C.jpeg (3.03 MiB) Viewed 4 times
8F354D4A-0932-468A-9717-8FA3F6047BDE.jpeg
8F354D4A-0932-468A-9717-8FA3F6047BDE.jpeg (2.17 MiB) Viewed 4 times
D1D7CF0F-DAC2-48AD-84BD-22A231D0550A.jpeg
D1D7CF0F-DAC2-48AD-84BD-22A231D0550A.jpeg (2.36 MiB) Viewed 4 times


Who is online

Users browsing this forum: No registered users and 0 guests