Tacho with electronic ignition.

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
midget
Minor Fan
Posts: 397
Joined: Fri Jul 18, 2014 10:51 am
Location: Wantage, Oxon
MMOC Member: Yes

Tacho with electronic ignition.

Post by midget »

I have an MGB rev counter which I am fitting to my project. Previous owner fitted Accuspark ignition, so need a wiring diagram please for I understand that the conventional method will not work?
John
pgp001
Minor Addict
Posts: 667
Joined: Sun Aug 27, 2017 6:05 pm
Location: West Yorkshire
MMOC Member: Yes

Re: Tacho with electronic ignition.

Post by pgp001 »

There is some useful info here that might help you.
http://www.lotuselan.net/forums/viewtop ... 558&start=

Phil
midget
Minor Fan
Posts: 397
Joined: Fri Jul 18, 2014 10:51 am
Location: Wantage, Oxon
MMOC Member: Yes

Re: Tacho with electronic ignition.

Post by midget »

Thanks for that, I think I will revert back to conventional points/condenser set up.
John
paul 300358
Minor Fan
Posts: 467
Joined: Thu May 11, 2017 8:23 pm
Location: South Cheshire
MMOC Member: Yes

Re: Tacho with electronic ignition.

Post by paul 300358 »

I would suggest that you contact the distributor doctor for your points and condenser. The country lanes are littered with copies from eBay.
myoldjalopy
Minor Legend
Posts: 2518
Joined: Tue Jan 29, 2013 10:32 pm
Location: Kernow
MMOC Member: Yes

Re: Tacho with electronic ignition.

Post by myoldjalopy »

I concur with 'paul300358'. The good doctor's points and condensor are top quality and will give you a super-reliable set-up which will give long and reliable service. I wouldn't use anything else now.
midget
Minor Fan
Posts: 397
Joined: Fri Jul 18, 2014 10:51 am
Location: Wantage, Oxon
MMOC Member: Yes

Re: Tacho with electronic ignition.

Post by midget »

Yes, absolutely. I already have their/his kit on another A series powered Marina. Works beautifully now.
John
Chipper
Minor Addict
Posts: 858
Joined: Thu Apr 26, 2007 11:43 pm
Location: Kent
MMOC Member: No

Re: Tacho with electronic ignition.

Post by Chipper »

I fitted a cheap 2" E-bay tachometer (the one in the middle of the three) to my Traveller with Accuspark, and it works a treat! :D I connected the tacho input (green wire) to the switched side of the ignition coil (blue wire from the Accuspark).
Image
Maurice, E. Kent
(1970 Traveller)
Post Reply