This is an issue I've come across before but never managed to satisfactorily answer - maybe you can help. What is the logic behind having a circuit wired battery live, fuse, load, switch, battery earth? Everywhere else I have come across in the world is wired live, fuse, switch, load, earth. Examples are horn and wipers on our cars. I fear there is a simple explanation but I just can't see it.
Regards
Ian
Switching on earth
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1664
- Joined: Thu May 12, 2016 6:33 am
- MMOC Member: No
Re: Switching on earth
Wipers generally continue to run after they are switched off. Does that answer that one?
- geoberni
- Minor Legend
- Posts: 3589
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Switching on earth
Generally the whim of the designer in my experience.
Self parking wipers as mentioned by oliver90owner , could be a reason, but that's very much a 'could', in that on the Minor the wiper motor has 2 separate earths, one via the switch, one direct. A more modern car tends to have 2 supplies to the Wiper Motor, one via the switch, and a single earth.
But the old non self parking Minor Wipers also had the switch on the 'earth side' of the circuit.
Sometimes it can be the relative places in the vehicle that denotes the place in the circuit to place the switch.
Self parking wipers as mentioned by oliver90owner , could be a reason, but that's very much a 'could', in that on the Minor the wiper motor has 2 separate earths, one via the switch, one direct. A more modern car tends to have 2 supplies to the Wiper Motor, one via the switch, and a single earth.
But the old non self parking Minor Wipers also had the switch on the 'earth side' of the circuit.
Sometimes it can be the relative places in the vehicle that denotes the place in the circuit to place the switch.
Basil the 1955 series II
Re: Switching on earth
I wondered about wipers but as has been said there are 2 earths to self park and on moderns there are 2 feeds.
I also wondered about position on vehicle and saving wire but surely not worth it.
It just seems to me that having the load and the wires feeding it live all the time, even when not in use is less safe than having the switch on the live side. There is no effect on function though.
I also wondered whether there was some link with the change from pos to neg earth and the discussions around which way electricity flows, but I can't see a link there myself.
Thanks for the thoughts. Perhaps it will remain one of life's mysteries.
Regards
Ian
I also wondered about position on vehicle and saving wire but surely not worth it.
It just seems to me that having the load and the wires feeding it live all the time, even when not in use is less safe than having the switch on the live side. There is no effect on function though.
I also wondered whether there was some link with the change from pos to neg earth and the discussions around which way electricity flows, but I can't see a link there myself.
Thanks for the thoughts. Perhaps it will remain one of life's mysteries.
Regards
Ian
-
- Minor Fan
- Posts: 319
- Joined: Tue Jan 29, 2019 9:37 am
- MMOC Member: Yes
Re: Switching on earth
I've always assumed that the horn was wired like that because it's easier to make the switch in the steering wheel boss, if it was wired conventionally it'd require two wires fed through the steering wheel splines/nut. As for the wiper motor, I just though it was to do with the self parking, how were wiper motors wired before self parking came about?
-
- Minor Legend
- Posts: 1051
- Joined: Tue Nov 08, 2016 3:18 pm
- Location: Manchester ( Damp and Miserable ) and that's just the wife...
- MMOC Member: Yes
Re: Switching on earth
Ian
Without doing any research , I think you are closest..
" It just seems to me that having the load and the wires feeding it live all the time, even when not in use is less safe than having the switch on the live side. There is no effect on function though. "
John ;-)
Without doing any research , I think you are closest..
" It just seems to me that having the load and the wires feeding it live all the time, even when not in use is less safe than having the switch on the live side. There is no effect on function though. "
John ;-)
-
- Minor Friendly
- Posts: 19
- Joined: Tue Jan 08, 2019 10:10 pm
- MMOC Member: Yes
Re: Switching on earth
We’re not the only ones to be (have been) thinking about it ...
http://www.locostbuilders.co.uk/viewthr ... ?tid=57804
http://www.locostbuilders.co.uk/viewthr ... ?tid=57804
Apolaustic
1966 white/red convertible (1098cc with alternator, electronic ignition & brake servo)
1966 white/red convertible (1098cc with alternator, electronic ignition & brake servo)
- geoberni
- Minor Legend
- Posts: 3589
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Switching on earth
Being a SII, Basil doesn't have self parking wipers. The circuit is Fuse > Wiper Motor > Switch > to Earth via Terminal E on the Regulator/Control Box. See N28 in the manual.PoolGuy wrote: ↑Mon Jan 06, 2020 10:21 pm I've always assumed that the horn was wired like that because it's easier to make the switch in the steering wheel boss, if it was wired conventionally it'd require two wires fed through the steering wheel splines/nut. As for the wiper motor, I just though it was to do with the self parking, how were wiper motors wired before self parking came about?
Basil the 1955 series II