Torque settings 1275 engine
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 685
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Torque settings 1275 engine
Hi all was wondering if I would get away with a quarter inch torque wrench for the sump and other small jobs such as head bolts and water pump.Dont want to buy a half inch as well if I can get away with it.What do you think.
Re: Torque settings 1275 engine
I wouldn’t have thought a half inch drive was calibrated high enough for head bolts, even if it was strong enough, which I would say it isn’t. Invest in a half inch wrench, you’ll need in future it if you intend to keep motoring.
-
- Minor Maniac
- Posts: 10881
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Torque settings 1275 engine
A 1/4" square drive torque wrench is not man enough to set head nuts to 50lbf ft.
As Les suggests buy a 1/2" drive torque wrench.
They are not expensive.
You can always step down to do smaller nuts.
3/8" drive is a good compromise.
Whatever you buy make sure that it has a calibration certificate.
As Les suggests buy a 1/2" drive torque wrench.
They are not expensive.
You can always step down to do smaller nuts.
3/8" drive is a good compromise.
Whatever you buy make sure that it has a calibration certificate.
- geoberni
- Minor Legend
- Posts: 3632
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Torque settings 1275 engine
A good point, but...the question is,philthehill wrote: ↑Sun Mar 21, 2021 5:19 pm Whatever you buy make sure that it has a calibration certificate.
What are you going to do with the Wrench in 6 or 12 months?
How are you going to get the calibration checked?
How long are you going to have trust in the certificate?
Does anyone periodically check their torque wrench themselves, even at a single setting, such as mid-range?
Basil the 1955 series II
-
- Minor Maniac
- Posts: 10881
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Torque settings 1275 engine
If you use a torque wrench with a known original calibration certificate correctly and unscrew/loosen the torque wrench after every use the calibration will remain.
My Britool torque wrench is many years old but is still serviceable and I would trust it every time to get the torque setting right. Tolerance can be checked against another torque wrench.
One of my torque wrenches (and I have at least 4 of different capacities) and of the type originally used in the aircraft/space industry specifies in the operating instructions that so long as the tension on the spring is removed after use it will not go out of original specification. But there again you get what you pay for.
I do check the torque settings against other torque wrenches.
You can easily get the torque wrench calibrated but it would be cheaper to buy a new torque wrench with a current certificate.
My Britool torque wrench is many years old but is still serviceable and I would trust it every time to get the torque setting right. Tolerance can be checked against another torque wrench.
One of my torque wrenches (and I have at least 4 of different capacities) and of the type originally used in the aircraft/space industry specifies in the operating instructions that so long as the tension on the spring is removed after use it will not go out of original specification. But there again you get what you pay for.
I do check the torque settings against other torque wrenches.
You can easily get the torque wrench calibrated but it would be cheaper to buy a new torque wrench with a current certificate.
-
- Minor Addict
- Posts: 685
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Torque settings 1275 engine
Thank you gentleman
-
- Minor Fan
- Posts: 222
- Joined: Sat Sep 12, 2020 9:20 pm
- MMOC Member: No
Re: Torque settings 1275 engine
Agree with Phill.philthehill wrote: ↑Sun Mar 21, 2021 8:25 pm If you use a torque wrench with a known original calibration certificate correctly and unscrew/loosen the torque wrench after every use the calibration will remain.
The tool cribs where I work have to get all the torque wrenches calibrated (and pressure gauges and hand mics etc) every year.
I call out the tools for the engine fitters and part of what I have to do is log the certificate, fitter id what have you so I have the lifecycle of the wrenches from years and years and most never change - and the ones that are recalibrated are only in the tenths on a Newton.
It’s a big shipyard with a lot of tools and recalibration at an outside company is $100 a pop.
Maybe good trade to get into!
-
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: Torque settings 1275 engine
Buy a good quality wrench Britool etc not those inferior Chinese tools