I currently have my axle broken down so I can inspect parts and overhaul before building up and re-installing.
I have all the parts I need with the exception of the 2no thrust bearings that carry the differential cage, which I am having trouble tracking down. None of the more high profile suppliers appear to stock them.
Can someone please point me to a supplier of these bearings?
Thanks in anticipation.
.
MM Split Case Rear Axle - Bearing Replacement
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 399
- Joined: Wed Apr 15, 2009 11:51 pm
- Location: Usually on the naughty step
- MMOC Member: Yes
MM Split Case Rear Axle - Bearing Replacement
- Attachments
-
- thumbnail_IMG_6472.jpg (384.92 KiB) Viewed 686 times
-
- thumbnail_IMG_6471.jpg (310.46 KiB) Viewed 686 times
Busy collecting parts for my '52 MM Convertible and 1949 Saloon restorations. :o
-
- Minor Fan
- Posts: 475
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Re: MM Split Case Rear Axle - Bearing Replacement
Take them in to a local bearing supplier which you will probably find with google. They should measure them and be able to offer replacements.
Take what you are fitting the bearing to so that they can measure any radiuses on the shaft.
Take what you are fitting the bearing to so that they can measure any radiuses on the shaft.
-
- Minor Fan
- Posts: 399
- Joined: Wed Apr 15, 2009 11:51 pm
- Location: Usually on the naughty step
- MMOC Member: Yes
Re: MM Split Case Rear Axle - Bearing Replacement
Sounds like a good idea Paul, I hadn’t thought of that.
However, I made contact with the Morris Register over the weekend with my query and they came back to me immediately informing me that they have the bearings in stock.
I’ve ordered two and they are on their way!
However, I made contact with the Morris Register over the weekend with my query and they came back to me immediately informing me that they have the bearings in stock.
I’ve ordered two and they are on their way!
Busy collecting parts for my '52 MM Convertible and 1949 Saloon restorations. :o
-
- Minor Legend
- Posts: 1956
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: MM Split Case Rear Axle - Bearing Replacement
That is a standard bearing that was used on many differentials. I have the same 19LJ35 R&M in my MG TD. It is a metric bearing and the modern equivalent is an SKF 7207B measuring 35x72x17mm.
Hope this helps
Regards
Declan
Hope this helps
Regards
Declan
Regards
Declan