Free to a good home
I have made an executive decision and will not be progressing any further on building a uprated 998cc in line 'A' Series engine.
The block assys are in good condition, the coolant galleries have been soaked in citric acid and are clean.
The better of the two blocks I believe could get away with just replacing the rings after a good hone. They have been re-bored in the past.
Collection only from Hampshire
If interested please PM me.
Also I have numerous parts - NOS 998cc pistons, good used 998cc flat top pistons, Cooper rods, MG 2 ring camshaft, 940 head, NOS 9 spring stronger clutch cover available plus other NOS parts but they will not be free but could be part of a 998cc engine build package if so desired.
qty 2 948cc block/crank/pistons assys
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Maniac
- Posts: 10882
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: qty 2 948cc block/crank/pistons assys
Hi Phil. I'd love to have a 948 block and crank please, especially if they don't need any work. Where abouts in Hampshire are you?
1961 Morris Minor 1000
-
- Minor Maniac
- Posts: 10882
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: qty 2 948cc block/crank/pistons assys
I would not go so far as to say no work is required but they are in too good a condition to just throw away.
Just north of Romsey in the Test Valley.
Just north of Romsey in the Test Valley.
-
- Newbie
- Posts: 1
- Joined: Wed Apr 10, 2024 10:30 pm
- Location: UK
- MMOC Member: No
Re: qty 2 948cc block/crank/pistons assys
PM sent Phil......thanks Chris
-
- Minor Maniac
- Posts: 10882
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: qty 2 948cc block/crank/pistons assys
One block/crankshaft assy has been collected.
One 948cc block/crankshaft remaining.
One 948cc block/crankshaft remaining.