Does the head need to be removed to fit o ring valve oil seals?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 15
- Joined: Sat Nov 20, 2021 11:27 pm
- MMOC Member: No
Does the head need to be removed to fit o ring valve oil seals?
Do I need to remove the head to replace the old o ring valve stem seals?
-
- Minor Maniac
- Posts: 10907
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Does the head need to be removed to fit o ring valve oil seals?
I you are going to replace like for like - save yourself some time and effort and leave as is. The small 'O' ring seals are next to useless in stopping oil from going down the valve guide.
To do the job properly you need to remove the head and fit the later grooved valve guides to the inlet tracts. Then fit the efficient top hat seals. With unleaded petrol it is better that the exhaust valve guides do not have seals fitted as the valves run hotter and need all the lubrication they can get.
The parts required are available from ESM.
To do the job properly you need to remove the head and fit the later grooved valve guides to the inlet tracts. Then fit the efficient top hat seals. With unleaded petrol it is better that the exhaust valve guides do not have seals fitted as the valves run hotter and need all the lubrication they can get.
The parts required are available from ESM.