Page 1 of 1
Lowlight wing flange
Posted: Thu Mar 05, 2020 3:08 pm
by ianmack
I’ve just bought a pair of fibreglass lowlight front wings from a ‘well known supplier’. The flanges are in place for fitting to the inner wings and A post but nothing on the front edge to attach to the grille panel. Is this right? If it’s right like this how is the front edge of a lowlight wing secured? I haven’t got old ones to compare.
- 38F4D3EC-2D5E-494A-AD2E-3416EFCC252A.jpeg (1.22 MiB) Viewed 1215 times
Re: Lowlight wing flange
Posted: Thu Mar 05, 2020 3:42 pm
by plastic_orange
They should just bolt up to the front panel using the hockey sticks as per the steel version. I assume it's a lowlight front panel you are bolting them to, as later panels are a different shape - as are the hockey sticks.
Pete
Re: Lowlight wing flange
Posted: Thu Mar 05, 2020 5:26 pm
by ianmack
I am using an original steel lowlight grille so I assume the wing should have a front edge flange to join the hockey stick. Have I been sent a defective part?
Re: Lowlight wing flange
Posted: Thu Mar 05, 2020 7:32 pm
by RobThomas
Nope. Just drill through the grille holes to line it up.
- hfiugoo.jpg (210.15 KiB) Viewed 1178 times
Re: Lowlight wing flange
Posted: Thu Mar 05, 2020 7:37 pm
by RobThomas
Hockey sticks go through front panel, front wings then inner wings.
- DSC01012.jpg (265.75 KiB) Viewed 1176 times
Re: Lowlight wing flange
Posted: Fri Mar 06, 2020 7:51 am
by ianmack
Many thanks Pete and Rob, I can see how it all goes together now.