Morris Minor Owners Club

The car was equipped with seat belts. I want to install them now, but I can't figure out which is which. Fasteners in the body are available. The front left and right are the same and not mirrored. Does anyone have instructions?

What year and model is your car? The fittings vary slightly.

AKD530 Manual is available to download from Internet for free and contains a section on fitting belts to the various models in section R

simmitc wrote: ↑Sat Apr 27, 2024 5:56 pm What year and model is your car? The fittings vary slightly.

It is a Minor 1000 from 1965. Charles Ware built a convertible, before that it was a two-door sedan. I guess they added the seat belts.

Bill_qaz wrote: ↑Sat Apr 27, 2024 6:35 pm AKD530 Manual is available to download from Internet for free and contains a section on fitting belts to the various models in section R

I'll search.

Thanks

Here is a pic

Bela wrote: ↑Sat Apr 27, 2024 8:30 am The car was equipped with seat belts. I want to install them now, but I can't figure out which is which. ... The front left and right are the same and not mirrored.

They should normally be mirrored.
This illustration you've posted is for the Drivers side (in a RH Drive). Note the way the buckle sits, the diagonal to the front of the buckle.
. .
The only difference for the passenger (LH) side will be the diagonal part of the strap will go to the rear of the buckle when used instead of to the front....
The securing effect remains the same. But if yours are identical and you want to flip it, see youtube: https://youtu.be/WD5jgz_9sKE

The fitting instructions you seek are readily available on the Securon website....http://www.securon.co.uk/fitting/seat_belts_fitting.htm

Thank you for additional hints - very usefull

I found the instruction

http://www.securon.co.uk/fitting/extras/500fitting.htm