Search found 104 matches
- Sun Apr 16, 2023 8:01 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1216
Re: indicator wiring
2 wires go from the hazard switch to the indicators, the indicators work okay with one of the wires (l) from the tin can to the no 1 terminal of the relay, its a 59 morris minor with trafficators which work and if you have a bmc workshop manual its page N38 wiring diagram i have been working off the...
- Sun Apr 16, 2023 6:05 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1216
Re: indicator wiring
i have all the wiring now connected, as i dont have wire coming from the ignition to the tin can x (wire from x to fuse box on this car) so cut this wire and joined the two wires i had left to either end, the hazard warning light and the hazard relay is working but the indicators on the four corners...
- Sat Apr 15, 2023 6:03 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1216
Re: indicator wiring
thanks Stephen and Bill i will have another look tomorrow, the hazard switch i got from esm i think it was about £28 the two wires i have left are both green and red i did get the instrutions with the switch but they dont match the wiring on the car (i dont have the wire from the ignition switch goi...
- Sat Apr 15, 2023 2:45 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1216
Re: hazard wiring
i have now got the indicators working and trying to fit a hazard switch all wiring to hazard switch sorted except the two wires that are supposed to go to the ingnition switch wire that goes to the indicator tin can but i have a 1959 minor and the wire from the ign switch goes to the fuse box not th...
- Thu Mar 30, 2023 9:30 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1216
indicator wiring
hi, i have a 1959 4 door morris minor 945 engine, i have replaced the indicator stalk ( esm) but i am having problem with the wiring there are six wires coming from it green-white-green-red which i know go to either side which are connected,, A earth wire and the wire for the horn a wire for the sta...
- Sun Mar 26, 2023 6:54 pm
- Forum: Mechanical
- Topic: Windscreen Wiper Boxes
- Replies: 18
- Views: 3216
Re: Windscreen Wiper Boxes
hi, i have found a supplier that sells old but new wiper boxes on ebay they are called jolly-old-car-spares-ltd hope this helps
- Fri Oct 28, 2022 9:10 pm
- Forum: General Discussion
- Topic: speedo drive
- Replies: 2
- Views: 385
Re: speedo drive
hi, i had the wrong speedo drive in the gear box, it was the brass nut one, found a plastic drive and the speedo works as it should
- Fri Oct 14, 2022 9:55 pm
- Forum: Mechanical
- Topic: Thread sizes
- Replies: 117
- Views: 160666
Re: Thread sizes
a new one for the pinion & bush speedometer drive housing the size is 1.1/8inch nut
- Fri Oct 14, 2022 9:42 pm
- Forum: General Discussion
- Topic: speedo drive
- Replies: 2
- Views: 385
Re: speedo drive
hi, i found the size its 1 1/8 inch i have ordered a box spanner so hopefully it will do the job still dont know if i have the right speedo drive
- Wed Oct 12, 2022 9:08 pm
- Forum: General Discussion
- Topic: speedo drive
- Replies: 2
- Views: 385
speedo drive
hi, can anyone tell me the spanner size for the speedometer drive housing nut its a brass nut not the plastic one, just taken the car (A 1959 morris minor with 948 gearbox )out on a test run after more than 2 years of fixing it up to a good standard and found that the speedo is not working i attache...
- Fri Mar 11, 2022 9:16 pm
- Forum: General Discussion
- Topic: window frame brackets
- Replies: 1
- Views: 244
window frame brackets
hi i am striping the window frames and have found that some of the steel corner brackets have which hold the frame together have rusted away looked on esm they dont have any, anybody know where i can buy some cheers
- Sun Oct 10, 2021 11:41 am
- Forum: Restoration Projects
- Topic: relay shaft
- Replies: 5
- Views: 3136
Re: relay shaft
cheers mate
- Sat Oct 09, 2021 1:35 pm
- Forum: Restoration Projects
- Topic: relay shaft
- Replies: 5
- Views: 3136
Re: relay shaft
hi simmitc one last question where does the return spring fit on to. cheers
- Sat Oct 09, 2021 12:39 pm
- Forum: Restoration Projects
- Topic: relay shaft
- Replies: 5
- Views: 3136
Re: relay shaft
thanks simmitc for the great advice but i had to take the nearside gearbox mounting off push it across and finally got the shaft in cheers
- Fri Oct 08, 2021 10:16 pm
- Forum: Restoration Projects
- Topic: relay shaft
- Replies: 5
- Views: 3136
relay shaft
I have fitted the engine and gearbox into the car all tightened down and then i decided to install the new the clutch pedal linkage with a new relay shaft what a nightmare which ever way i tried to fit it seems too long other than taking the engine back out how do you install the shaft i would be gr...
- Tue Aug 24, 2021 11:20 pm
- Forum: General Discussion
- Topic: master cylinder circlip
- Replies: 1
- Views: 387
master cylinder circlip
hi does anybody know where i can buy the circlip that fits in the end of the master cylinder, i have tried the normal places but no luck
- Sun Jul 25, 2021 8:31 pm
- Forum: Restoration Projects
- Topic: wiring
- Replies: 1
- Views: 2758
wiring
I am busy putting a new harness in or should i say a used one which was put in a minor then he realised that it was the wrong one so he took it out without it getting used my problem is i have just about completed the wiring except the wiring behind the dash because when he removed the harness he cu...
- Wed Dec 16, 2020 8:18 pm
- Forum: Bodywork
- Topic: door handles
- Replies: 8
- Views: 1481
Re: door handles
hi all, just to let you know that the lock is not below the door handle but is in the handle cheers jeff
- Wed Dec 16, 2020 9:37 am
- Forum: Bodywork
- Topic: door handles
- Replies: 8
- Views: 1481
Re: door handles
thanks manyminors for your reply, it is very hard to find a drivers side door handle for a 4 door plenty of 2 door handles but handles for a 4 door are very scarce and they want a sky high price if you can find one
- Mon Dec 14, 2020 8:07 pm
- Forum: Bodywork
- Topic: door handles
- Replies: 8
- Views: 1481
door handles
I know that the external door handles on a 2 door and 4 door are different, i am not sure why but my question is can i change just the handle which is fixed with a round steel pin to the internal part from a 2 door car to a four door car i have is a 59minor with the lock below the handle