Morris Minor Owners Club

I had a trip just like that when I had a Beetle!

Gulp!
Thanks for all the advice!

Hi
Can anyone give me an approximate cost of replacing the sills on a Traveller and a reliable garage to carry out the work in the Central Scotland area.

Hi
I’m in Kincardine.

Hi
Does anyone know of a welders near Central Scotland who can sort out my travellers rusty sills?
I’ve looked at previous posts and a garage in the borders no longer does the work.
Thanks

Thanks again for taking the time to respond much appreciated..I’ll have another go.

Hi
Thanks for that. I’d fit the old bowls but one has the flange that holds the spring missing. I’ll have a go at what you suggest.
Thanks.

I have fitted new headlights and bowl but I am unable to refit the outer chrome bezel. Is there some special way to refit them? Have I possibly screwed the bowl too tight to the rubber? Help!

Hi
As I am a bit of an eejit can any one tell me how to (a) remove rust damaged sills and (b) replace with new replacement sill parts. Any help or tips gratefully received.
Thanks

Hi
I fitted what came with the order from Charles Ware from there web and selected items from diagram showing rear brakes. I have successfully changed the front ones.

If it was a fault in the washers would the fluid not then be showing at the bottom of the banjo and not at the top as it does now.?

Got the parts from Charles Ware

Okay Dokey I’ll do that.
Thanks

I’ve fitted new washers….excuse my ignorance …how do I anneal them?

Rear brakes giving me grief. Put on new brake pipes and all new fixings but have a fluid show from the banjo at the bleed nipple end..it seems to be coming up the side of the banjo, evident on both rear brakes. I have replaced it all again with the same result. What am I doing wrong? All connections...

Hi
Thanks for all the replies.I only noticed all the other replies after I had posted. I know it is not a disaster….that was only a wee bit of exaggeration on my part.
Thanks again.

How are we going to keep our cars on the road with E5 fuel being replaced by E10? As of now a local petrol station only has E10 It's a disaster.

Thanks for the replies..I’ve managed to get the cylinder in.Phew!

How difficult is it to remove rear backplate.? I seam to have damaged it and can’t get the new brake cylinder to fit.
I think there is a wee twist on the plate!

I’m having great difficulty trying to remove my front brake cylinders, The retaining nuts nuts are worn and rusty. I’ve used WD40 tried heat but they won’t budge, any help much appreciated.