Search found 5 matches
- Sat Sep 14, 2013 4:11 pm
- Forum: Mechanical
- Topic: Thread sizes
- Replies: 117
- Views: 159193
Re: Thread sizes
Hi As a little addition to thread sizes , the track rod ends can be 5/8 BSF or 5/8 UNF . The way to tell is use a front hub nut on the male thread coming out of the rack or the oilpipe banjo bolt on the ball joint. The ones supplied to me by the people who rebuilt my rack were BSF but I managed to o...
- Sun Jan 20, 2013 3:03 pm
- Forum: Useful Tips
- Topic: Poor damp starting
- Replies: 5
- Views: 3031
Re: Poor damp starting
Take it from my hard experience ,the rubber covers cause the cap to ''sweat '' which exacerbates the problem ,but better than nowt.
- Fri Jan 18, 2013 8:57 pm
- Forum: Useful Tips
- Topic: Poor damp starting
- Replies: 5
- Views: 3031
Poor damp starting
A useful tip to avoid poor starting on damp morning is to wash the dizzy cap [inside and out ] and also all the ignition leads ,caps etc with Methelated Spirit. This will remove all traces of oil film that allows the spark to '' track '' and I can assure you this is far better than spraying WD4O eve...
- Mon Nov 19, 2012 8:48 pm
- Forum: Bodywork
- Topic: Removal of top cant rail
- Replies: 3
- Views: 1043
Re: Removal of top cant rail
Great news ,......i think thanks for the swift reply,will let you know how I get on after Christmas as I will be cruising to the Caribean until then ....I know it's a tough life but somebody has to do it .
Now where did I put the sun factor 30 !!
Now where did I put the sun factor 30 !!
- Mon Nov 19, 2012 8:30 am
- Forum: Bodywork
- Topic: Removal of top cant rail
- Replies: 3
- Views: 1043
Removal of top cant rail
Hi,have just bought a Morris Traveller [1969] needing a bit of work,I need to replace the upper cant rail on the lh side . I have removed the sliding windows,channels,headlining,roof gutter and inner wood cappings but cannot see how to remove the aforementioned rail. Is it glued or nailed to the inn...