Search found 221 matches

by Johnno
Fri Oct 23, 2020 2:15 pm
Forum: Series MM Register
Topic: Water temp gauge
Replies: 6
Views: 88

Re: Water temp gauge

Thankyou,John.
by Johnno
Fri Oct 23, 2020 11:05 am
Forum: Series MM Register
Topic: Water temp gauge
Replies: 6
Views: 88

Water temp gauge

Hi all,can anyone post a diagram on how to wIre a Smiths Electric water temp gauge please.Electrics definitely not my strong point!
Thanks,John.
by Johnno
Wed Jul 22, 2020 5:49 pm
Forum: Series MM Register
Topic: 4th ring
Replies: 0
Views: 418

4th ring

Hi all,just purchased a set of rings for my side valve MM.I take it the bottom ring is just to hold the piston steady.? Mine has dowels in the bottom ring lands. Should there be a correct way to gap the ring?the dowel is approx 4mm so impossible to gap to 2 thou.4 ring pistons.
Definitive answer is,,,
by Johnno
Sat Jul 18, 2020 3:32 pm
Forum: Series MM Register
Topic: Piston rings
Replies: 1
Views: 148

Piston rings

In need of four ring piston bottom rings plus 40 thou for side valve engine.
Any help please.
by Johnno
Sat Jul 11, 2020 5:21 pm
Forum: Series MM Register
Topic: Engine rebuild.
Replies: 6
Views: 280

Re: Engine rebuild.

Thanks guys,most helpful.
by Johnno
Thu Jul 09, 2020 8:21 pm
Forum: Series MM Register
Topic: Engine rebuild.
Replies: 6
Views: 280

Engine rebuild.

Re my last post,is there anyone on here who can regrind the crank and supply bearings for my sidevalve engine? I know there are numerous engineering shops around but I would prefer someone here to do the job.Or has anyone got a good crank with bearings for sale?
John.
by Johnno
Mon Jun 29, 2020 2:46 pm
Forum: Series MM Register
Topic: Oil filter
Replies: 20
Views: 626

Re: Oil filter

This has a built in PRV,my existing one does not have this.
by Johnno
Mon Jun 29, 2020 11:15 am
Forum: Series MM Register
Topic: Oil filter
Replies: 20
Views: 626

Re: Oil filter

I should have mentioned I have the side valve engine.Its a ‘52 model.
by Johnno
Mon Jun 29, 2020 9:01 am
Forum: Series MM Register
Topic: Oil filter
Replies: 20
Views: 626

Oil filter

Hi guys,just picked up this oil filter housing.Question is will it fit straight on to my engine and work correctly?
Thanks,Johnny.
7B9DC928-AFC2-404A-8546-43B6B0848106.jpeg
7B9DC928-AFC2-404A-8546-43B6B0848106.jpeg (1.98 MiB) Viewed 556 times
E6793075-50E4-46AC-A023-4B710E7CB5D8.jpeg
E6793075-50E4-46AC-A023-4B710E7CB5D8.jpeg (2.07 MiB) Viewed 556 times
3876B53F-60DF-495A-8C4B-0D4B53A23028.jpeg
3876B53F-60DF-495A-8C4B-0D4B53A23028.jpeg (2.46 MiB) Viewed 556 times
by Johnno
Sat Jun 13, 2020 5:30 pm
Forum: Series MM Register
Topic: regrind.
Replies: 1
Views: 257

regrind.

Hi all,the time has come for regrinding crank.Any recommendations for regrind and new shells? This is for my ‘52 side valve.
Thanks,John.
by Johnno
Mon May 18, 2020 2:41 pm
Forum: Series MM Register
Topic: Rich
Replies: 8
Views: 783

Re: Rich

Well,here’s a thing.Thought I would try once again.Half choke,couple of tickles on the float and,,,,,,,,,,fired up and ticked over perfectly! My car is not named Maggie Mae for nothing! Apologies girls but most women/ girls are slightly temperamental.I’ll just sit back and wait for the flack. Thanks...
by Johnno
Sat May 16, 2020 7:06 am
Forum: Series MM Register
Topic: Rich
Replies: 8
Views: 783

Re: Rich

Thanks for reply Rob,the carburettor is spotless in and out.Jet centred correctly and piston free.Just can’t see anything wrong anywhere.Despair time now.
by Johnno
Thu May 14, 2020 2:49 pm
Forum: Series MM Register
Topic: Rich
Replies: 8
Views: 783

Re: Rich

Checked that this morning Rob,all ok.
It will start instantly with a whiff of easy start but the cuts out.Does this point to carburettor? I can see nothing wrong with it though.
by Johnno
Tue May 12, 2020 1:18 pm
Forum: Series MM Register
Topic: Rich
Replies: 8
Views: 783

Re: Rich

All correct,centred and not sticking,big spark,timing checked.Now not starting at all.
by Johnno
Sun May 10, 2020 2:42 pm
Forum: Series MM Register
Topic: Rich
Replies: 8
Views: 783

Rich

Hi all,still having problems with rough running on my ‘52 side valve.Rebuilt carb,reground all valves and all valve springs are same length.Tappets set at 17 thou timing checked.Compression roughly equal on all cylinders.Trouble with initial starting and then engine ‘hunts’.What else can I do? Thank...
by Johnno
Sun Mar 22, 2020 6:33 pm
Forum: Series MM Register
Topic: Running very rich
Replies: 2
Views: 351

Re: Running very rich

No but I will check that site.
Thanks.
by Johnno
Sun Mar 22, 2020 7:33 am
Forum: Series MM Register
Topic: Running very rich
Replies: 2
Views: 351

Running very rich

Hi all,after a carb rebuild on my ‘52,I am having trouble with very rich mixture.Nothing I do seems to make any difference to this.I have checked and rechecked the carb and can see nothing wrong.Am I missing something. Also,are the jet seals available separately?Or is there an alternative? Thanks,Jo...
by Johnno
Tue Feb 18, 2020 3:39 pm
Forum: Series MM Register
Topic: Valve springs
Replies: 12
Views: 976

Re: Valve springs

All sorted now.Thanks to those who took the trouble to reply,John.
by Johnno
Mon Feb 17, 2020 9:48 am
Forum: Series MM Register
Topic: Valve springs
Replies: 12
Views: 976

Re: Valve springs

Yes mate.
by Johnno
Sat Feb 15, 2020 8:14 am
Forum: Series MM Register
Topic: Valve springs
Replies: 12
Views: 976

Re: Valve springs

Ok,thanks for that.