Search found 2537 matches
- Sat Apr 27, 2024 12:30 pm
- Forum: Mechanical
- Topic: Steering rack
- Replies: 11
- Views: 8109
Re: Steering rack
Just use common sense. The reason not to overfill is because as you steer the car, the bellows contract and expand again and if it is too full, the bellows may split on the contraction. I think you'd have to fill it pretty full of oil for that to happen. As regards grease, the EP90 oil does thicken ...
- Fri Apr 26, 2024 10:37 am
- Forum: Mechanical
- Topic: Best recon engine supplier?
- Replies: 11
- Views: 351
Re: Best recon engine supplier?
Very good! At that price I might get one myself!
- Thu Apr 25, 2024 8:49 pm
- Forum: Mechanical
- Topic: Best recon engine supplier?
- Replies: 11
- Views: 351
Re: Best recon engine supplier?
Ess, if you've got a compression tester........
- Thu Apr 25, 2024 1:28 pm
- Forum: Mechanical
- Topic: Tachometer wiring check
- Replies: 8
- Views: 150
Re: Tachometer wiring check
Yes, I would cut the red wire and fit a new connector. Just don't cut it too short!
- Thu Apr 25, 2024 11:32 am
- Forum: Mechanical
- Topic: Best recon engine supplier?
- Replies: 11
- Views: 351
Re: Best recon engine supplier?
That knocking may be a broken crankshaft. If so, it will be a lot cheaper to replace this than get a recon engine. Were it me, I would be dropping the sump to take a look. I had exactly this many years ago and with the new crankshaft the engine has been running sweetly ever since. Or it could be a f...
- Tue Apr 23, 2024 12:14 pm
- Forum: Bodywork
- Topic: Bodywork Repair Recommendation South East
- Replies: 10
- Views: 231
Re: Bodywork Repair Recommendation South East
This sort of work is always going to be expensive, Stephen. I had a bare metal respray done about nine years ago, including repairs to the door bottoms and a repair to a front wing. I sourced my own replacement brightwork over the previous year as required (second-hand but good). The re-spray has st...
Re: Cameras
Watch the road ahead, unless you want to be dead!
- Fri Apr 19, 2024 12:00 pm
- Forum: Mechanical
- Topic: Tappet chest cover - confusion
- Replies: 8
- Views: 173
Re: Tappet chest cover - confusion
So as Phil suggests, we can call it what we want then!
- Thu Apr 18, 2024 1:58 pm
- Forum: General Discussion
- Topic: Vacuum Advance.
- Replies: 17
- Views: 612
Re: Vacuum Advance.
How long are these things meant to last anyway? I have never had to replace one but maybe modern replicas are liable to failure? I guess anything from the Dizzy Doc would be good quality though........
- Tue Apr 16, 2024 12:09 pm
- Forum: Mechanical
- Topic: Diff Oil Amount.
- Replies: 7
- Views: 234
Re: Diff Oil Amount.
Not long ago I noticed a strange whirring noise when setting off from stationary, which then disappeared on driving faster but which also occurred when cornering. It was difficult to pinpoint but seemed to come from the rear. I wondered about the level of the diff oil so topped it up - it didn't tak...
- Mon Apr 15, 2024 11:59 am
- Forum: Mechanical
- Topic: Spark plugs
- Replies: 13
- Views: 348
Re: Spark plugs
In many cases the gasket moves out of position when the rocker cover is fitted. Gluing the gasket to the rocker cover helps reduce that happening. Greasing the face of the gasket against the head also helps keep the gasket supple and stops the gasket sticking to the head when the rocker cover is re...
- Thu Apr 11, 2024 5:23 pm
- Forum: Bodywork
- Topic: seat restoration
- Replies: 3
- Views: 269
Re: seat restoration
What about wax polishing them? Rub a little carnaubia wax in and polish off. Or even a wax furniture polish spray?
- Tue Apr 09, 2024 6:27 pm
- Forum: General Discussion
- Topic: Saftek Brake Shoes
- Replies: 3
- Views: 163
Re: Saftek Brake Shoes
Better braking performance than non-Saftek shoes, presumablyManyMinors wrote: ↑Tue Apr 09, 2024 5:23 pm "better braking performance" than what exactly??
For myself I have never heard of them.
- Mon Apr 08, 2024 11:46 pm
- Forum: Mechanical
- Topic: Manifold Work Tips?
- Replies: 7
- Views: 263
Re: Manifold Work Tips?
Definitely worth checking to see if the leak is in the joint between the pipe and the manifold before resorting to pulling the manifold off. That joint is a favourite for blowing - the standard clamp is not the best design. ESM offer a more robust version: https://www.morrisminorspares.com/engine-c1...
- Mon Apr 08, 2024 8:29 pm
- Forum: Mechanical
- Topic: Manifold Work Tips?
- Replies: 7
- Views: 263
Re: Manifold Work Tips?
You don't need to remove the carb, just release and tie the manifold out the way with the carb, exhaust pipe etc. still attached. The Exhaust pipe joint may be compromised doing this though. If the pipe joint needs to be re-made, jack the pipe into position before fitting the clamp.
- Mon Apr 08, 2024 10:06 am
- Forum: Mechanical
- Topic: 7" brakes worth saving?
- Replies: 3
- Views: 134
Re: 7" brakes worth saving?
Put them in the 'For Sale' section on here and see what happens........
- Sat Apr 06, 2024 5:33 pm
- Forum: Mechanical
- Topic: Clutch not “working
- Replies: 15
- Views: 518
Re: Clutch not “working
As above, almost certainly a stuck clutch from sitting idle. The adjustment isn't going to go out through sitting still all winter. As 'ManyMinors' suggests, getting the engine warmed up may be enough to free it. Or it may need to be shocked apart as already suggested. It will come free in the end.
- Tue Apr 02, 2024 6:03 pm
- Forum: Mechanical
- Topic: Clutch fork gaiter
- Replies: 7
- Views: 303
Re: Clutch fork gaiter
Ah, I understand now. Yes, I can see that the gaiter is being pulled out in your picture. Have you been underneath with someone else pressing the pedal down so you can see if anything is catching anywhere? Maybe someone else will be along in a bit with ideas....obviously, it shouldn't pull out norma...
- Tue Apr 02, 2024 4:37 pm
- Forum: Mechanical
- Topic: Clutch fork gaiter
- Replies: 7
- Views: 303
Re: Clutch fork gaiter
Well, that's odd as all the ones I've seen have a more oblong hole and gaiter. The ESM one (for all OHV models) is oblong: https://www.morrisminorspares.com/gearbox-c76/gearbox-all-o-h-v-models-gearbox-c79/rubber-gaiter-for-clutch-lever-22h1337-p830859 The question then is - what shape hole have you...
- Sun Mar 31, 2024 1:37 pm
- Forum: Electrical
- Topic: Morris Minor Pickup 1965 not starting
- Replies: 34
- Views: 1433
Re: Morris Minor Pickup 1965 not starting
Just to add, you will need to make sure the float is full of fuel before by-passing the ign. switch as the pump will not work without ignition switch on.