Morris Minor Owners Club

Thanks Phil, will have another look at the weekend.

It is on both sides, I can get the fixing partly through the damper arm hole enough to get the nut on but cannot get the full length of the taper through. I’ve tried gentle persuasion and that doesn’t work. It all lines up just won't go all the way through as I would expect. I’ll try to clean the ho...

Good afternoon, Currently rebuilding our 1959 4 door and just refitted rear axle, cleaned dampers up, new leaf springs etc and I've tried to fit the new drop links to the damper arm and whatever I do I simply cannot seem to get the tapered drop link into the arm. I've cleaned the hole up after paint...

Good evening,

I’m looking for 2 good condition front and rear valance for our 1959 Morris. My front one might be repairable but on the look out to see what’s available. Anywhere in East Anglia or the Midlands would be good.

Thanks,

James

Many thanks Phil for your kind offer; PM sent.

Good afternoon, I have just taken my dampers apart to clean them up and one of them is missing the spring that goes into the body and the valve goes through. Does anyone have a spare one at all? I've attached a picture and circled the spring in question. Apologies in advance Declan Burns for using o...

Apologies if I have missed info about it but has it been confirmed as dates says TBC on the website?

Evening everyone,

We are getting ready to start a rebuild on our 1959 Morris minor and before pressing buy on a new rollover jig, wondered if anyone in East Anglia had a jig we could buy off them or hire?

Many thanks,

James

firedrake1942 wrote: ↑Sat Jun 08, 2019 12:21 pm I am visiting a scrap car on Monday and I am just down the road from you . If they are there I will recover them and let you know.

Brilliant, thank you. Where about are you based?

Hi Phil,

Many thanks, will look at those. From memory, they need to be quite short don't they?

Thanks,

James

Thanks, John. Sadly were are in Cambridgeshire so a bit far sadly.

I’ve just had the Speedo repaired on our 1959 4 door Moggy but I’ve misplaced the two retaining screws for it. Does anyone know the part number? Couldn’t easily find it looking at the parts diagrams I’ve found online.

Many thanks,

James

Good afternoon, I am missing the screws for the passenger side glove box hinges on our 1959 4 door Morris as well as the two screws for the pivot on the sun visor. Does anyone know the sizes for these screws? I have looked around and think the glove box hinge screws are No. 6 but any advice would be...