Morris Minor Owners Club

merry X-mas
and a better new year
to every one
stay safe
Stu

hi mate
that would be great let me know how to pay for the postage
is it a BSPT? as that's what i have been told is the correct thread
unless you know different?
many thanks
Stu

hi all
does anyone have a axle drain plug tap i can borrow to clean out the threads on an axle I'm building up?
i believe its a 1/2" BSPT ?
i would of course pay for the postage if not local (N-East Scotland)
cheers
Stu

cheers mate spot on !

oops me bad i should have stated its a 1275 engine build
not sur if the 1275 thermostat housing is taller??

hi all just fitted a new thermostat housing to by ongoing engine build and the stud seem a bit short ie the nuts with washer go on ok but i would like to see a bit more thread out of the top of the nuts what size /length are the standard ones and are longer ones available ? IMG_20200711_142729219.jp...

thanks

hi yeah 1275 midget

its getting there slowly but surely

god that's a blast from the past!! DLT !!

forgot to say I'm in the north east of Scotland Aberdeenshire
i do valeting but only when i can fit it in with work more of a hobby than a full time job
couple more of the cars I've done

it dosnt look to bad but with a car that age should it be perfect you would be surprised mate the blue vw had been through car washes and the paint was a right mess the Aston took me about 30hrs to do (was a mates so no rush) this was his pervious aston before DSCF1161.JPG DSCF1162.JPG after DSCF13...

all depends on budget and personal preference
i have polish/ waxes that cost only a few quid up to nearly £100
here is my morris along with the shelves stocked with too much stuff!! lol and here's a couple of 'old bangers ' i did for mates

yeah hence i thought i would check with someone with more know how than me
many thanks

ok mate
cheers for the diagram very helpful
the box im looking at doesn't have a rev switch set up
and going by the info on the diagram its a 1098 minor box as the shaft number shows?
it was the hydraulic clutch that threw me

hi all can anyone give me any info on mg midget gearboxes i have the chance of a mg midget box with an output shaft number 22g171 it has hydraulic clutch which make me believe its defo a midget box unless any knows different am i right in thinking its a 1098 midget box not a 1275(which I'm after) an...

ok mate many thanks for the info
i had a strange feeling that was the case so i have ordered a couple of new brake pipes
so i can rotate the servo
cheers

hi
i used the bracket supplied with servo which makes the 'nose' slightly higher than the rear ?
Stu

Hi as for the coil it was fitted there before i decide to fit a servo!
i made up the bracket once i changed from dynamo to alternator

cheers for that i had heard/seen that the servo should be 'twisted' slightly so the
white vent? is to the side??