Morris Minor Owners Club

Hi many thanks. Mike

Hi many thanks I have led in the rear red lights. But I will try your suggestion. Many thanks Mike

Hi,
I have fitted an internal third brake light, which works when the brake pedal is depressed, however when releasing the pedal there is still a dim light showing. Can anyone assist with why this is. TIA
Mike

Hi geoberni,
Many thanks for your help. I’ll think I will go for the one on the rear window/parcel shelf.
Mike

Hi many thanks for the replies to fitting a high level brake light. Something to do in the evening with a good fan heater to keep me warm in the garage.

Hi I have tried to find something on the website about this but have failed. I wish to fit a brake light on the rear parcel shelve in my saloon Morris. Can anyone suggest what type is best and the wiring diagram to connect to existing brake lights. Many thanks. Sorry if this has been mentioned befor...

Hi John,
Many thanks and yes that you were right.
Both working ok.
Mike

Hi, My Trafficator had been working up to week ago, but they started to fail. On taking the switch out from under the dash through the glove box, I discovered on taking it apart it was corroded. I have purchased a new one from a MM supplier. On trying to connect it I had power from the live wire fro...

Hi,
Many thanks for replies to my problem. I will have to see if I get to the bottom of the problem.
Thanks again
Mike.

Hi I have the above item on my 1957 Morris this one has the horn included. When using the indicator to turn going right it fails to work, but if I pull it up it operates. Turning left is ok. Can anyone point in the right direction as to what to look for when I take it apart. Luckily my trafficators ...

Hi,

Many thanks for all your help.
Happy motoring.

Mike

Hi,
Many thanks, just one question do i have to jack up the suspension in order to undo the nut and put on the lock washer.

Cheers again Mike

Hi, The MOT advised that the lock washer on the top trunnion, was not the correct one as the nut had come loose. I have never worked on this part of the car before, so I would be grateful for any help. I have purchased the correct washer from esm. I have tried to search the message board on this sub...

Hi, I have searched various sections but have not found the answer. So sorry in advance if it has been already been covered. I have a 1957 4 door saloon, and the drivers door cannot be locked from inside, i believe this is to stop you locking you keys inside. However i would like to be able to fit a...

Hi,

Glad you are back.

Happy New Year to every one

Mike

Hi, Have finished putting in Ford Ka seats in the front. I followed Andy Wilsons information from the custom and modified news letter. Have to thank Martin for the seats. I have found the seats very comfortable, and considering I have never done anything like this before, all went quite well. Removi...

Yes I have gone over to the black ones as has been said, a lot easier to fit around the corners and they stay on.

Well yes I know what you mean about going through the the rig ma roll of value mileage photographs and so on. I did try other companies a few years ago and they offered low premiums for limited mileage, and market rate for the car. I had to laugh when I questioned limited mileage and asked did they ...

I have just renewed mine with FJ and asked how I could reduce it, they gave me a discount of nearly £20.

Hi, First I am not a member of the Custom and Modified register, but I hope you will still be able to assist. I have obtained two front seats and I wish to put them in my 4 door morris saloon. I have been sent the CMR newsletter from January 2013, and have read the item on the seats by Andy Wilson. ...