Search found 51 matches
- Sun Sep 02, 2018 7:14 pm
- Forum: General Discussion
- Topic: Lower trunion to swivel pin
- Replies: 5
- Views: 1540
Re: Lower trunion to swivel pin
It's all together now, feels alittle stiff but it's turning as should? This was an example photo, they were cleaned and grease up upon assemble.
- Sun Sep 02, 2018 12:23 pm
- Forum: General Discussion
- Topic: Lower trunion to swivel pin
- Replies: 5
- Views: 1540
Lower trunion to swivel pin
Can anybody shed some light on this subject as I'm stuck, I got the lower trunion to swivel pin on first time, to do this I had to remove the threaded pin which fits which the bushes in the trunion, when putting it back in the swivel became real tight and wouldn't move at all. I had to disassemble i...
- Tue May 29, 2018 8:49 pm
- Forum: Bodywork
- Topic: Chassis legs replacement
- Replies: 5
- Views: 1524
Chassis legs replacement
Hi chaps, going to be soon replacing the chassis legs on my Morris, from front to centre cross member, my question is has anybody done this without a roll over jig or a ramp? How difficult did you find it? Any pointers before I make a start? Any advice welcome on this subject
- Sun May 20, 2018 1:37 pm
- Forum: General Discussion
- Topic: Front chassis legs
- Replies: 1
- Views: 681
Front chassis legs
Hi all, what to hear some peoples experiences in changing the front chassis legs without a rollover jig, how did you go about it, and any pointers?
Cheers
P.s also added a photo of my Morris as some of you were requesting before
Cheers
P.s also added a photo of my Morris as some of you were requesting before
- Thu Feb 15, 2018 7:55 pm
- Forum: Mechanical
- Topic: Fueling issue
- Replies: 9
- Views: 1784
Re: Fueling issue
Hello chaps and thanks all for your input! Had the car fired back up this evening, turns out it ran out of fuel. More fuel and bled the system then toke her out for a drive! Which leads to my next question, can the float be adjusted in the fuel tank as the gauge reading is wrong? It was reading just...
- Wed Feb 14, 2018 8:20 pm
- Forum: Mechanical
- Topic: Fueling issue
- Replies: 9
- Views: 1784
Fueling issue
Hello chaps, been a while since I've logged on here. I broke down this evening in my 1958 Morris fitted with a 1098. It began by being slightly hesitant, the fuel pump began to tick, then juddering, then the ticking became rapid. I thought the fuel gauge may have been reading wrong and tank had ran ...
- Fri Jul 07, 2017 7:30 pm
- Forum: General Discussion
- Topic: Anti roll bar ground clearance
- Replies: 10
- Views: 2588
Re: Anti roll bar ground clearance
What roll bar do you run Phil? Very nice Morris by the way! Is that a 1380? Think I read up on a thread about it before
- Fri Jul 07, 2017 6:02 pm
- Forum: General Discussion
- Topic: Anti roll bar ground clearance
- Replies: 10
- Views: 2588
Re: Anti roll bar ground clearance
Phil, I have the esm roll bar, unfitted though.
- Thu Jul 06, 2017 10:22 pm
- Forum: General Discussion
- Topic: Anti roll bar ground clearance
- Replies: 10
- Views: 2588
Anti roll bar ground clearance
Hey guys, wondering if anybody running an anti roll bar has any issues with ground clearance, especially when it comes to speed bumps! The esm one for example with brackets attached to the chassis rails. Also those running a roll bar with a lowered car also!
- Sun Sep 25, 2016 7:38 pm
- Forum: Custom & Modified Register
- Topic: Marina van torsion bars
- Replies: 22
- Views: 19754
Re: Marina van torsion bars
That explains it all thanks again Phil great description, top man!
- Sun Sep 25, 2016 11:46 am
- Forum: Custom & Modified Register
- Topic: Marina van torsion bars
- Replies: 22
- Views: 19754
Marina van torsion bars
Hello chaps, is there any way of identifying marina van torsion bars over the marina saloon ones? Also how do they differ? Thanks.
- Wed Jun 08, 2016 6:35 pm
- Forum: General Discussion
- Topic: Escort axle fitting kit
- Replies: 1
- Views: 1074
Escort axle fitting kit
Hello chaps, has anyone with an escort axle swap used the JLH fitting kit, and what existing set up did you use? I'm wondering if these are suitable to use with morris leaf springs. Any advice would be appreciated. http://www.jlhmorrisminors.co.uk/axle-fitting-kit.html
- Wed Jun 08, 2016 6:12 pm
- Forum: Mechanical
- Topic: Misfiring!
- Replies: 13
- Views: 3771
Re: Misfiring!
Hello there, I will p.m you
- Mon Apr 18, 2016 7:53 am
- Forum: General Discussion
- Topic: Spotted today.
- Replies: 2459
- Views: 734094
Re: Spotted today.
Who knows aye haha
- Sun Apr 17, 2016 7:24 pm
- Forum: General Discussion
- Topic: Spotted today.
- Replies: 2459
- Views: 734094
Re: Spotted today.
Several morris minors about in the Solihull area (west midlands) anyone on here?
- Wed Jan 27, 2016 4:15 pm
- Forum: General Discussion
- Topic: Spotted today.
- Replies: 2459
- Views: 734094
Re: Spotted today.
Drove past two Morris minors today, a blue 2door on lode lane, Solihull. And again another, green 4door, lode lane again, I was also out in my Morris who in which we gave the thumbs up, anyone on here?
- Sun Sep 27, 2015 3:42 pm
- Forum: General Discussion
- Topic: Oil leak
- Replies: 4
- Views: 1513
Re: Oil leak
I don't intend to with the 1098, currently building a race engine
- Sat Sep 26, 2015 11:33 pm
- Forum: Custom & Modified Register
- Topic: series II with ford crossflow
- Replies: 6
- Views: 7799
Re: series II with ford crossflow
Very nice, anymore engine bay pics?
- Sat Sep 26, 2015 11:02 pm
- Forum: General Discussion
- Topic: Oil leak
- Replies: 4
- Views: 1513
Oil leak
So my Morris has had a slight oil leak which has been going on for ages now from around the dipstick area, this ain't the problem... what is the problem is that I have oil all over my garden paving ha ha, it's been a right pain in the a*** to clean up so does anybody have any tricks,ideas, technique...
- Fri Sep 18, 2015 7:29 pm
- Forum: Mechanical
- Topic: Misfiring!
- Replies: 13
- Views: 3771
Re: Misfiring!
Thanks for the replies chaps, I assumed it wasn't the coil but swapped it anyhow just in case.. was from an Austin a40 as we have a couple of a40s, but from what I've seen and read up, ill probably buy an electronic ignition, everything else seems tip top!