The rear windscreen is small enough without blocking it with stickers
You can wire the trafficators and indicators to work off one switch, there is a wiring diagram available.
The trafficator bulbs can be replaced with flashing led bulbs
Search found 10180 matches
The clap hands wipers can be improved by fitting adjustable length arms and 12 inch blades. Adjust the arms so that the blades almost touch the top of the screen then move the arms on the spindles so that they are staggered and do not touch. This will reduce the unswept V in the centre of the screen
- Tue Mar 07, 2017 8:16 pm
- Forum: Mechanical
- Topic: Rear brakes - poor performance.
- Replies: 24
- Views: 2826
The rear shoes set as supplied should have two shoes with circular cut outs which fit over the snail adjusters and two shoes without which fit on the top of the wheel cylinder. The front shoes should have a cut out on all four shoes. Check that the wheel cylinder is free to slide in the slot on the ...
- Wed Feb 22, 2017 8:03 pm
- Forum: General Discussion
- Topic: Registation of 1948 - Are you agree ?
- Replies: 1
- Views: 704
There are a few 1948 Series MMs still existing, 501, 507, 584 plus a couple more in UK, and several in Australia. Claims are often made for 1948 cars but these usually turn out to be 1949 cars. As the chassis numbers were issued in batches starting at 501 for 2 door cars, 5001 for CKD cars and 5501 ...
In reply to a recent PM, the instruments are mounted on a modified Series MM right hand instrument panel with the square holes changed to round to fit a combined oil pressure / water temp gauge and a voltmeter. The rev counter is a standard Smiths 1960s unit. Make sure that you get the correct +/- u...
- Tue Oct 11, 2016 7:49 pm
- Forum: Electrical
- Topic: Wiring diagram 1958 traveller
- Replies: 8
- Views: 1495
If you lay the new loom out on the floor you should be able to identify the terminals. The colours should not change between models so it becomes a matter of elimination. If the original loom is plastic coated then you can strip it down for spare wires. If it is a mass of black wires then you may as...