Search found 124 matches
- Mon Jun 19, 2017 7:27 pm
- Forum: Mechanical
- Topic: Sheared shackle plates beware!!
- Replies: 22
- Views: 6687
Re: Sheared shackle plates beware!!
The plates were purchased about 6 years ago and fitted with washers against the pin. They were purchased as one side of the rear spring was rubbing against the inner wing very slightly. They were removed 4 years ago and bushes replaced when the car was restored. I have contacted the supplier to aler...
- Mon Jun 19, 2017 9:18 am
- Forum: Mechanical
- Topic: Sheared shackle plates beware!!
- Replies: 22
- Views: 6687
Sheared shackle plates beware!!
Hi, Car due MOT soon and on pre inspection the 4 shackle plates on the rear springs had all sheared. They are lengthened ones that I bought from a supplier a few years ago. Just a warning to anyone else who has these to check them. There was noting noticeable about the handling of the car to indicat...
- Fri Jun 16, 2017 2:28 pm
- Forum: Other
- Topic: Help fitting BRM (rover 200) seats.
- Replies: 13
- Views: 4866
Re: Help fitting BRM (rover 200) seats.
Bolted an angle bracket to it. The seat belt brackets are nice and strong too.
- Fri Jun 16, 2017 12:55 pm
- Forum: Other
- Topic: Help fitting BRM (rover 200) seats.
- Replies: 13
- Views: 4866
Re: Help fitting BRM (rover 200) seats.
The rear ones are right angle brackets from a seat belt mounting with a packer underneath bolted through the floor with a plate underneath. The front are angle iron dexion and bolted through the original holes.
- Fri Jun 16, 2017 12:53 pm
- Forum: Other
- Topic: Help fitting BRM (rover 200) seats.
- Replies: 13
- Views: 4866
Re: Help fitting BRM (rover 200) seats.
There you go.
- Fri Jun 16, 2017 12:26 pm
- Forum: Other
- Topic: Help fitting BRM (rover 200) seats.
- Replies: 13
- Views: 4866
Re: Help fitting BRM (rover 200) seats.
I have them fitted to my car. I will try and take a few pics. They are bolted to angle iron and then bolted to the floor.
- Thu Apr 27, 2017 9:41 am
- Forum: General Discussion
- Topic: Ford KA seat purchase options
- Replies: 4
- Views: 1478
Re: Ford KA seat purchase options
Rover BRM seats - a tight fit but very comfy>
- Sat Jul 23, 2016 4:06 pm
- Forum: General Discussion
- Topic: FULL and FRANK CONFESSION
- Replies: 34
- Views: 8190
Re: FULL and FRANK CONFESSION
Well done Roy
- Wed Jun 03, 2015 3:15 pm
- Forum: General Discussion
- Topic: A series spares derby
- Replies: 8
- Views: 4300
Re: A series spares derby
I bought a cover from them last year without any problems. It was excellent quality and good value.
- Tue Mar 24, 2015 11:57 am
- Forum: Electrical
- Topic: electronic ignition
- Replies: 37
- Views: 7320
Re: electronic ignition
Do you have the vacuum advance pipe connected to the carb? The advance in the distributor is electronic but you need to either seal the end at the carb or keep the pipe connected.
- Thu Jul 10, 2014 5:26 pm
- Forum: Do you know....?
- Topic: IGNITION KEYS
- Replies: 9
- Views: 2672
- Wed Apr 23, 2014 8:00 pm
- Forum: General Discussion
- Topic: MOT Pass!
- Replies: 26
- Views: 7682
Re: MOT Pass!
Well done on the MOT pass Roy. It is always a nice feeling.
http://www.bailcast.com/products/durabo ... small-400g
Is it definitely the small size for the moggy?
Rog
http://www.bailcast.com/products/durabo ... small-400g
Is it definitely the small size for the moggy?
Rog
- Wed Mar 05, 2014 3:52 pm
- Forum: Stolen!
- Topic: 2 door stolen and set alight - Sheffield
- Replies: 27
- Views: 27223
Re: 2 door stolen and set alight - Sheffield
Thanks for letting me know the size.
- Wed Mar 05, 2014 12:40 pm
- Forum: Stolen!
- Topic: 2 door stolen and set alight - Sheffield
- Replies: 27
- Views: 27223
Re: 2 door stolen and set alight - Sheffield
What size fits a Minor steering wheel?
Thanks
Thanks
- Thu Feb 27, 2014 8:13 am
- Forum: Bodywork
- Topic: Bumper blades
- Replies: 6
- Views: 2134
Re: Bumper blades
I have used the fibreglass ones back and front and they are good. New chrome seems to be poor quality from just about all suppliers. From other threads Birmingham Morris Minor Centre would seems to offer the best quality chrome.
- Thu Jan 16, 2014 2:59 pm
- Forum: Custom & Modified Register
- Topic: Heated Series 2 split screen
- Replies: 5
- Views: 2597
Re: Heated Series 2 split screen
I would be interested. Might be a bit pricey tjhough. Let me know how you get on.
- Sat Jul 06, 2013 10:17 am
- Forum: General Discussion
- Topic: Cornbury Park - Catering Vans or the lack of!
- Replies: 40
- Views: 10826
Re: Cornbury Park - Catering Vans or the lack of!
Hi folks, Just took these photos in the park while walking the dog this morning. Catering vans for a certain parade in Coatbridge today. Maybe the sign of things to come at the rallies! [frame] http://mmoc.org.uk/mbimage.php?src=1373102187_6280 [/frame] [frame] http://mmoc.org.uk/mbimage.php?src=137...
- Sat Mar 02, 2013 5:25 pm
- Forum: Useful Tips
- Topic: Solar Trickle Charger
- Replies: 8
- Views: 5233
Re: Solar Trickle Charger
Some others on special offer at Maplins
http://www.maplin.co.uk/solar-powered-1 ... ger-223251
http://www.maplin.co.uk/12v-4w-solar-briefcase-348061
Rog
http://www.maplin.co.uk/solar-powered-1 ... ger-223251
http://www.maplin.co.uk/12v-4w-solar-briefcase-348061
Rog
- Sat Nov 03, 2012 10:33 pm
- Forum: Other
- Topic: Repainting underparts - best paint??
- Replies: 23
- Views: 5101
- Sat Nov 03, 2012 6:39 pm
- Forum: Other
- Topic: Repainting underparts - best paint??
- Replies: 23
- Views: 5101
Re: Repainting underparts - best paint??
What sort of price is Brantho Korrux 3 in 1?