Search found 1110 matches
- Sun Feb 17, 2019 6:07 pm
- Forum: General Discussion
- Topic: Carboot Bargain
- Replies: 15
- Views: 3013
Re: Carboot Bargain
Ah, basically neighbours (ish!), I am in Portsmouth.
- Sun Feb 17, 2019 4:04 pm
- Forum: General Discussion
- Topic: Carboot Bargain
- Replies: 15
- Views: 3013
Re: Carboot Bargain
Phil, i didn't realise you were in Hampshire! I could've badgered you in person for your knowledge!
- Tue Feb 12, 2019 10:57 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Aye up, Yesterday i fitted the 731 cam to my car. I did this as i wanted to change the cam chain, so as i had the cam, thought it would be daft not to give it a go. Cam is good as it didn't require me to change the oil pump again. First impressions are good. Idle appears to be ok, not noticeably lum...
- Fri Feb 08, 2019 4:03 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Well, i was impatient, so i made the glovebox components. If i didn't have the speaker i would definitely do away with the glovebox and mount the tacho on a board, as it is a right pig to fit. But fit it does. The tacho is completely enclosed/boxed in, so looks relatively neat. It isn't perfect, but...
- Thu Feb 07, 2019 9:47 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Aye up, Car is running well still. The last 2 weeks i have been doing a 25 mile commute on the motorway for 3/4 of the journey. The 4.2 diff pulls nicely, it does miss that pep away from the lights, but once revs are up, it holds them well, so worth it for me. I certainly wouldn't want anything like...
- Mon Feb 04, 2019 8:13 am
- Forum: Mechanical
- Topic: 1275 Air filter
- Replies: 27
- Views: 5086
Re: 1275 Air filter
Judging by the filter mounting holes, i would say HIF44.
- Tue Jan 29, 2019 6:15 pm
- Forum: Mechanical
- Topic: tickover
- Replies: 9
- Views: 1807
Re: tickover
Looking down, if a HS carb (as opposed to HIF), clockwise will richen it.
- Sat Jan 26, 2019 4:11 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Hey Sleeper, It does appear that way yes. I have blocked those two "unfiltered inlets", and where i have drawn in black, have cut it out there. This means that air is now filtered going into the housing. I have also drilled some extra holes in the front. I located the filter within the hou...
- Fri Jan 25, 2019 7:13 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Haha, i hadn't thought of it, but it is uncanny!
I wonder if all the Spitfire/Late Midget owners realise!
I wonder if all the Spitfire/Late Midget owners realise!
- Fri Jan 25, 2019 4:12 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Well, this is the air filter all hooked up. Did all the modifications this morning. It appears to have quietened down the K&N noise, which was the aim. It won't be to everyones taste of course. Also, the wiring was stripped when i had to decipher what all the new wiring did, awaiting fitting som...
- Wed Jan 23, 2019 11:16 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Hi pgp,
Yep, pretty cheap off ebay.
These are the bits i bought, people have suggested getting dust boots too, which i can imagine would be good for longevity.
Yep, pretty cheap off ebay.
These are the bits i bought, people have suggested getting dust boots too, which i can imagine would be good for longevity.
- Wed Jan 23, 2019 9:27 pm
- Forum: Restoration Projects
- Topic: 1958 2 door, rolling resto
- Replies: 41
- Views: 9901
Re: 1958 2 door, rolling resto
Hello folks. I have been busy doing lots of little things to the car. Nothing too major, hence lack of posting. I have fitted a Mini RC40 exhaust system to my car. It is a 1.75" all the way through now. Welded on a new piece to the twin outlet Ital downpipe to mate up to it. It needs a little f...
- Thu Jan 17, 2019 4:06 pm
- Forum: Mechanical
- Topic: Distributor vacuum
- Replies: 3
- Views: 798
Re: Distributor vacuum
A good suggestion, but no, it does this with ignition kit fitted and removed.
Any other suggestions?
Any other suggestions?
- Thu Jan 17, 2019 2:03 pm
- Forum: Mechanical
- Topic: Distributor vacuum
- Replies: 3
- Views: 798
Distributor vacuum
Hi folks, The dizzy in my car is a Lucas 25d. The vacuum advance unit has been replaced at some point. A suck on the pipe holds vacuum, but it does release slowly. Is there anything to do on this? Historically i have always found them to return with a little *thud* when you release/stop sucking), so...
- Mon Jan 14, 2019 8:50 pm
- Forum: Mechanical
- Topic: Horn bracket
- Replies: 7
- Views: 1764
Re: Horn bracket
I have the same bracket in my '58, so i don't think it is a dynamo bracket (unless they used the same bracket for both for cost).
I agree with the fabricating though, should be an easy enough piece to make up with a drill and a grinder.
I agree with the fabricating though, should be an easy enough piece to make up with a drill and a grinder.
- Sun Jan 13, 2019 8:33 pm
- Forum: Electrical
- Topic: reversing light
- Replies: 32
- Views: 9775
Re: reversing light
Holy thread revival!
Been having a look at this and thought i'd give it a go myself in the coming weeks. I have bought myself a couple of microswitches to play with.
A great idea that i hadn't seen before and appears to be more accurate than a lot of other aftermarket types, kudos
Been having a look at this and thought i'd give it a go myself in the coming weeks. I have bought myself a couple of microswitches to play with.
A great idea that i hadn't seen before and appears to be more accurate than a lot of other aftermarket types, kudos
- Fri Dec 28, 2018 11:27 am
- Forum: Mechanical
- Topic: HIF38 possible fuelling problem
- Replies: 3
- Views: 896
Re: HIF38 possible fuelling problem
How does the fuel pump sound going up the hill? Does it tick more or less than normal? It could be lacking in pumping capacity, thus struggling a bit going up hill (assuming the throttle it quite wide open when going on the incline). But it could be lots of things, not discounting your float also. T...
- Mon Dec 24, 2018 8:51 am
- Forum: Mechanical
- Topic: Traveller Tuning
- Replies: 71
- Views: 11052
Re: Traveller Tuning
I agree with Panky regarding the rockers. They can have a good improvement, but for the cost, certainly better mods out there. The maddest A series i have had was a Mini 1098. It had been rebored with Hillman Imp pistons to 1215cc, 940 head, Kent 286, maniflow inlet and full exhaust, HIF38 and K&...
- Sun Dec 23, 2018 6:48 pm
- Forum: Mechanical
- Topic: Traveller Tuning
- Replies: 71
- Views: 11052
Re: Traveller Tuning
Hi Panky, Cheers for the update. The general consensus on the Mini forum is that a 1.625" exhaust is the optimal size, with 1.75" being the general preferred due to availability. For my build, i have had to juggle a compromise between cost/performance/aesthetics. To me, my current system a...
- Sun Dec 23, 2018 12:04 am
- Forum: Mechanical
- Topic: Traveller Tuning
- Replies: 71
- Views: 11052
Re: Traveller Tuning
Panky, i didn't want to suggest it as i hadn't done it myself before, but that is what i would do also. Slight thread hijack... My own Minor is a 998cc, 940 head, 1098 cam, HIF38 with K&N cone filter, AAA needle, Ital twin outlet exhaust manifold going into a 1.25" exhaust system. Could the...