Morris Minor Owners Club

Hi
have you got a vid of it running ?

Hi
in the pic with the oil pump in it looks like you removed
the top scroll seal cap and put a new gasket in
did you ?
if so did you set it up propley
it must be centered on the crank
not just bolted on

Hi
hear you go

https://www.facebook.com/pages/GJG-Engi ... 1971869780

nice and close I have used them
you will have to wate about 4 weeks

Hi
bring the block round and I will try and sort you

Hi change the cam follower with pitting on the face the casehardening is starting to wear through as for the thrust washers on the rocker shaft just turn them round so you get a new wear face you will find http://www.minispares.com/ much cheaper than most and if you join the mini forum for a fiver y...

Hi James
hav a look at number 3 spark plug counting from the front
is it the black ?
pop in and see me tomrow
will be about after 11

Hi
drill size 17/32
hand tap fine
why do you need thread per inch ?

Hi
now I wounder who posted this on the Austin A35 oweners club ?

Hi
we live in upper church road
if you want a tow just post hear or PM me
will PM you my phone number

Hi
use plus gas on the studs
NOT WD40
remove the nuts first and soke over night
be very careful its very easy to snap the studs
you can also heat up the ally housing around the studs
with a blow tourch and soke with plus gas again
lots of pople come to grief on this job

Hi
if you want to borrow a jack and a brake adjusting spanner
send me a PM we are in Hastings
have seen you out and about
we have the light blue travey

Hi
I dont think you have a head gasket problem
who did you use in Hastings to do the work

Hi
put some dish washer tabs in the rad and run for 3 or 4 days
then drain and refill

Decian

you have a PM

Thanks

hi Quick up date first of all Thanks every one yes she is on her way again :D will make her HI FI show she is exhibiting there http://www.highendso...gh_end_moc.html but with out her stand moggy meant to be ready at 12 O/C so I am going over to collect and taking all the tools and flaring tool so If...

Thanks
as yet still dont know what is going on

Hi My daughter has broken down in France She is about 60k from the tunnel on her way to Munich Germany one of the rear brake pipes is leaking its about 3 months old so I think it just needs a re flare a recovery truck is on the way to her but she does not speak French we probably need a translator c...

Hi My daughter has broken down in France She is about 60k from the tunnel on her way to Munich Germany one of the rear brake pipes is leaking its about 3 months old so I think it just needs a re flare a recovery truck is on the way to her but she does not speak French we probably need a translator c...

Hi
the Op has 160 psi compression
thats quite good
I have fitted cord rings on new reboard and rerung pistions
on 3 motors 1275 with no problems at all

I would be looking at the valve stem seals

Hi
Ac Dodd camshafts are great
and much cheeper than swiftune
you will find him hear

http://www.theminiforum.co.uk/