Search found 4674 matches

by simmitc
Fri Apr 08, 2011 7:31 pm
Forum: Electrical
Topic: Heater - 1968, 1098cc Morris
Replies: 13
Views: 2492

Re: Heater - 1968, 1098cc Morris

Katie, if I understand correctly, you have the ignition on, then operate the switch for the heater, and the fan does not run. As Marky and Chickenjohn say, this is electrical. The feed wire should be green (which is used for LOTS of wires) or green and yellow. You could have (a) a faulty switch, (b)...
by simmitc
Thu Apr 07, 2011 8:16 pm
Forum: Do you know....?
Topic: Morris minors are tops in survey
Replies: 12
Views: 1566

Re: Morris minors are tops in survey

Or other makes are declining faster :cry: We would need to see the actual numbers before we could draw the conclusion, and even then, would have to allow for varying numbers of responses - one can prove anything with statistics.
by simmitc
Tue Apr 05, 2011 9:35 pm
Forum: Electrical
Topic: Heater - 1968, 1098cc Morris
Replies: 13
Views: 2492

Re: Heater - 1968, 1098cc Morris

Basic controls! At the front of the heater (that is the bit nearest the back of the car :o ) is a lever that moves up and down. It controls a flap that directs air. Down is off. Middle = screen (demist), up = cabin. Whatever you do with it, some air will leak out. Below the flap is a switch. It turn...
by simmitc
Sun Apr 03, 2011 8:31 pm
Forum: Mechanical
Topic: Marina Disc Brake Conversion
Replies: 5
Views: 1461

Re: Marina Disc Brake Conversion

The remote fluid reservoir is essential as the calliper draw more fluid than the wheel cylinders. There is enough in the normal master cylinder, but you would need to check it and top up on a very frequent basis.
by simmitc
Sat Apr 02, 2011 9:02 pm
Forum: Off-Topic
Topic: Eddie Stobart
Replies: 5
Views: 796

Re: Eddie Stobart

Regretfully he passed away a few days ago :(
by simmitc
Sat Apr 02, 2011 9:01 pm
Forum: Mechanical
Topic: Boiling like a kettle.
Replies: 21
Views: 3121

Re: Boiling like a kettle.

Is performance OK? Any strange odours? Binding brakes could cause overheating, but unlikely to be as severe as you describe. Do you have access to a cooling system tester or block testing fluid - this changes colour if combustion gases are present in the cooling system. By "checking the coolant...
by simmitc
Sat Apr 02, 2011 6:26 am
Forum: Mechanical
Topic: Track rod lock nut
Replies: 10
Views: 1258

Re: Track rod lock nut

It stops the whole thing moving around and makes it easier to hit!
by simmitc
Fri Apr 01, 2011 8:06 pm
Forum: Mechanical
Topic: Track rod lock nut
Replies: 10
Views: 1258

Re: Track rod lock nut

Wire brush threads and nuts. Soak in Plus Gas for a day. Then soak in Plus Gas for a day. Select a perfectly fitting spanner. Apply good heat to the nut. Fit spanner, take up the slack, and hit with a big hammer - make sure that you are hitting CLOCKWISE as you want the nut to move on further, away ...
by simmitc
Tue Mar 29, 2011 8:44 pm
Forum: Other
Topic: tyres
Replies: 6
Views: 881

Re: tyres

For a standard Minor, I'd go 145 x 14 every time. Lose the remoulds, even though they won't affect the steering if they.re on the rear.
by simmitc
Fri Mar 25, 2011 3:53 pm
Forum: Mechanical
Topic: Confused - Petrol??!
Replies: 37
Views: 4110

Re: Confused - Petrol??!

The feed pipe from the tank to the pump is copper! What about the main jet?
by simmitc
Tue Mar 22, 2011 8:20 pm
Forum: Mechanical
Topic: Confused - Petrol??!
Replies: 37
Views: 4110

Re: Confused - Petrol??!

The only stupid question is the one that you don't ask. If you need to know something then ask away, that's how we all learn. Practical Classics magazine ran some tests and proved valve seat regression. The Federation of British Historic Vehicle Clubs has a list of approved (and tested) additives. M...
by simmitc
Sun Mar 20, 2011 8:58 pm
Forum: Mechanical
Topic: steering column noise
Replies: 4
Views: 1004

Re: steering column noise

If it is really from the column, then it's likely that the cover over the indicator switch is catching on the steering wheel, which is not running completely true - could be a worn felt bush. Try oiling the felt (just drip oil down the central column) and also adjusting the switch cover by slackenin...
by simmitc
Sun Mar 20, 2011 8:45 am
Forum: Bodywork
Topic: Door Drain Holes
Replies: 2
Views: 766

Re: Door Drain Holes

That sounds about right. The blanking plate is all part of the door construction, but does not really seal the holes - it should appear to be at a slight angle and not actually touching the hole. The standard holes are not round, they are elongated, so yours may be a modified door bottom. in which c...
by simmitc
Sat Mar 19, 2011 4:15 pm
Forum: Other
Topic: windscreen wipers - are they supposed to be ineffective?
Replies: 20
Views: 7256

Re: windscreen wipers - are they supposed to be ineffective?

Rainex is like Marmite. I hate Marmite, and certainly wouldn't use that on my windscreen.
by simmitc
Sat Mar 19, 2011 8:56 am
Forum: Mechanical
Topic: Clutch bite-point adjustment
Replies: 7
Views: 2126

Re: Clutch bite-point adjustment

The varying pedal position is caused by the release bearing gradually wearing down. Modern bearings tend to be ball race and do not wear, but ours are a ring of carbon which does wear down - NEVER sit with your foot on the clutch for long periods (eg waiting at lights), always put the car in neutral...
by simmitc
Fri Mar 18, 2011 7:51 pm
Forum: Mechanical
Topic: Clutch bite-point adjustment
Replies: 7
Views: 2126

Re: Clutch bite-point adjustment

Turn the nuts clockwise to decrease free play, which is what you need to do. 1.25 ins for 1098, 3/4 for 948, measured at the top of the pedal.
by simmitc
Fri Mar 18, 2011 9:54 am
Forum: Other
Topic: windscreen wipers - are they supposed to be ineffective?
Replies: 20
Views: 7256

Re: windscreen wipers - are they supposed to be ineffective?

It's probably down to wear and/or cheap replacements over the years. Start by checking the arms. There should be no play in the links, and the spring should be enough to hold the blade on the screen - not too much spring, just enough. With poor arms, the blades can lift away from the screen. Blades ...
by simmitc
Fri Mar 18, 2011 9:49 am
Forum: General Discussion
Topic: Collective Noun
Replies: 13
Views: 2292

Collective Noun

Seeing another post referring to a "collection" of Minors, I wondered what other nouns might be suitable...

Fleet and Collection both seem a bit tame. How about a garage, pump, brood, or mould? All suggestions welcome.
by simmitc
Mon Mar 14, 2011 9:34 pm
Forum: Other
Topic: Cheap 20/50 Oil - where's it gone?
Replies: 62
Views: 10408

Re: Cheap 20/50 Oil - where's it gone?

It was £8.99 for 5 litres, and it was available!
by simmitc
Mon Mar 14, 2011 7:26 pm
Forum: Other
Topic: Cheap 20/50 Oil - where's it gone?
Replies: 62
Views: 10408

Re: Cheap 20/50 Oil - where's it gone?

You need Roys of Wroxham, a great independent supermarket. They're practically every shop in Wroxham (Norfolk) and have a few other stores as well. http://www.roys.co.uk Plenty of their own brand 20/50 in Sudbury last Saturday. When the really cheap stuff has dried up, then I can recommend Morris Lu...