Did mine recently its a speedi sleeve part no CR99174
I got mine from these people as they have a branch close to me http://www.brt-bearings.com/1024x768/map.html but any local bearing supplier should be able to get you one.
Search found 805 matches
- Sun May 29, 2011 6:54 pm
- Forum: Mechanical
- Topic: Rear axle seal track repair kits?
- Replies: 5
- Views: 1808
- Fri Apr 22, 2011 7:22 pm
- Forum: Electrical
- Topic: car battery condition advice
- Replies: 9
- Views: 2594
Re: car battery condition advice
Open Circuit--------Approximate-------Average Cell Battery Voltage----State-of-charge---Specific Gravity ------12.65+----------------100%--------------1.265+ ------12.45------------------75%---------------1.225 ------12.24------------------50%---------------1.190 ------12.06------------------25%----...
- Fri Apr 22, 2011 7:05 pm
- Forum: Mechanical
- Topic: Missing & Stalling
- Replies: 5
- Views: 1466
Re: Missing & Stalling
That didn't last very long
Didn't you put a new one in last month
Didn't you put a new one in last month
- Thu Apr 07, 2011 7:14 pm
- Forum: Off-Topic
- Topic: SADMOG (Sowf'ampton taawn)
- Replies: 2741
- Views: 474543
Re: SADMOG (Sowf'ampton taawn)
so Ship then ?
- Thu Apr 07, 2011 6:47 pm
- Forum: Off-Topic
- Topic: SADMOG (Sowf'ampton taawn)
- Replies: 2741
- Views: 474543
Re: SADMOG (Sowf'ampton taawn)
as its a nice evening is anyone up for something over this way. Ship Inn Langstone maybe ?
- Wed Apr 06, 2011 9:31 pm
- Forum: Off-Topic
- Topic: SADMOG (Sowf'ampton taawn)
- Replies: 2741
- Views: 474543
Re: SADMOG (Sowf'ampton taawn)
anyone about tomorrow ?
- Wed Apr 06, 2011 6:54 pm
- Forum: Mechanical
- Topic: ARP con rod bolts
- Replies: 7
- Views: 1429
Re: ARP con rod bolts
I've found swiftune prices good for ARP bolts/studs etc
http://www.swiftune.com/Product/410/arp ... t-set.aspx
http://www.swiftune.com/Product/410/arp ... t-set.aspx
- Tue Apr 05, 2011 11:22 pm
- Forum: Custom & Modified Register
- Topic: fitting a ford z-tech in a morris
- Replies: 64
- Views: 24984
- Mon Mar 28, 2011 10:44 pm
- Forum: Mechanical
- Topic: Ominous axle knocks.....
- Replies: 16
- Views: 2089
Re: Ominous axle knocks.....
down the page are the Midget ones (same thing just shorter)
http://www.petermayengineering.co.uk/sp ... oducts.htm
http://www.petermayengineering.co.uk/sp ... oducts.htm
- Mon Mar 21, 2011 9:03 pm
- Forum: Custom & Modified Register
- Topic: mgB caliper on marina hub
- Replies: 7
- Views: 7860
Re: mgB caliper on marina hub
This is something Ive been considering as the marina calipers on mine will be needing an overhaul sometime in the near future & whether to bother or not.
keep us posted on your progress
keep us posted on your progress
- Thu Mar 17, 2011 7:20 pm
- Forum: Off-Topic
- Topic: SADMOG (Sowf'ampton taawn)
- Replies: 2741
- Views: 474543
Re: SADMOG (Sowf'ampton taawn)
Ok see you there
- Thu Mar 17, 2011 6:46 pm
- Forum: Off-Topic
- Topic: SADMOG (Sowf'ampton taawn)
- Replies: 2741
- Views: 474543
Re: SADMOG (Sowf'ampton taawn)
I'm about
- Sun Mar 13, 2011 11:10 pm
- Forum: Mechanical
- Topic: Ominous axle knocks.....
- Replies: 16
- Views: 2089
Re: Ominous axle knocks.....
If that nut has come loose you will need a new collapsible spacer to reset bearing preload . don't just gun it up as it will overload the bearings
- Sat Mar 12, 2011 10:08 pm
- Forum: Custom & Modified Register
- Topic: Ram Pipe Info
- Replies: 17
- Views: 5294
Re: Ram Pipe Info
was only a few horses in reality but it did smooth out a power dip it had at lower rpm
It will likely have an effect on the fuelling so the needle may need changing. mine is a custom one now.
It will likely have an effect on the fuelling so the needle may need changing. mine is a custom one now.
- Sat Mar 12, 2011 8:56 pm
- Forum: Custom & Modified Register
- Topic: Ram Pipe Info
- Replies: 17
- Views: 5294
Re: Ram Pipe Info
I made up my own rampipe. You can get bare spinning's from ITG & I welded one to a baseplate I made. tried with and without last time it was on a rolling road & there was a notable difference to the power curve
- Sat Feb 26, 2011 10:48 am
- Forum: Mechanical
- Topic: identifaction ital A or ital A+
- Replies: 13
- Views: 2418
Re: identifaction ital A or ital A+
& the charging system mountings will be spaced closer for an alternator rather than a dynamo. IIRC Marina A series mountings were spaced for an Alternator. I didn't word that very well :-? I meant the drilling's in the casting are narrower rather than the brackets. This forced my hand into usin...
- Sat Feb 26, 2011 10:38 am
- Forum: Custom & Modified Register
- Topic: HIF44 Choke operation
- Replies: 7
- Views: 4482
Re: HIF44 Choke operation
Choke on a hif is separate from the main jet, when operated the extra fuel is drawn up through a separate fuel circuit in the choke mechanism . the snail cam is just to open the throttle slightly to bring up the idle speed
- Thu Feb 24, 2011 10:38 pm
- Forum: Mechanical
- Topic: identifaction ital A or ital A+
- Replies: 13
- Views: 2418
Re: identifaction ital A or ital A+
The A+ has a ribbed block, the later distributor with a fork type clamp & the charging system mountings will be spaced closer for an alternator rather than a dynamo.
- Sat Feb 19, 2011 5:53 pm
- Forum: Mechanical
- Topic: Running as rough as a badgers behind
- Replies: 17
- Views: 1648
Re: Running as rough as a badgers behind
And it ran even better when we remembered to put the rotor back in
- Fri Feb 18, 2011 11:32 pm
- Forum: Off-Topic
- Topic: non morris bodge ideas.
- Replies: 10
- Views: 1412
Re: non morris bodge ideas.
Matt wrote:You make it sound like you dont go to work very often!
I wish