Morris Minor Owners Club

chertsey minors are not to far from you and i have used them a few times

when moggies left the factory they would have a plastic sheet covering the triangular holes in the door to keep water off the inner door panels. if the plastic is missing i would look to replace it

yes they can fit and i did it for exactly the reason you point out i.e. the MGB calipers are readily and cheaply available. they are not a straight fit and you can either modify the hub as i have.. http://mmoc.org.uk/viewtopic.php?f=25&t=37917&p=375584&hilit=mgb+caliper#p375584 or modify...

looking at these series 2 seats the later covers will not fit correctly unfortunately so you will need to continue your hunt..

http://www.ebay.co.uk/itm/morris-minor- ... SwFNZWz1Jm

they are handed but not angled because they are for modified minors and as such you do not know where the handbrake cables will be routed after the bracket to the back plates and you do not want to route the cable down if it needs to go up or vice versa

not sure what you mean by a "lug on the end of the gearbox" but it may well be possible to swap over the gearwheel, it is the gear wheel that controls the sweep of the wipers so you could have the correct sweep, the connection between the wiper motor and rack is the same between lots of lu...

i can not recommend a fan from personal use as the last time i did it i took one from a metro. things to be aware of, if you want to get a slim fan to fit between your radiator and front grill make sure it is a "push" fan as opposed to "suck\pull". If you decide to fit it in the ...

The original ones never clean up well, remaining very matt. While it's all apart anyway, it might be worth drilling out the mount and fitting a powerful red LED, fed from the brake lights. OK, it's no longer "original". But neither is having the car's rear end re-shaped by a BMW! Looking ...

if you have a disk lock park the car with the wheels on full lock before fitting the disc lock. no it will not stop them dragging the car onto the trailer but hopefully it will make a bit of noise and attract some attention.

hopefully this might help.. a 3.7 diff does not suit a standard 1098 engine, i have one in my car and the next job on my list is to remove and change back to a 4.2. I do not do that much motorway work and the 3.7 makes driving in town just rubbish as i have to work the engine harder than i would lik...

fancy one or two to join the two you won last year by any chance Pete?

reminder to myself do not post whilst doing something else.. no idea why i talked about the bonnet when the question was about the boot?

t is that time of year again and i have just received the Trophies for the Nationals If you would like to stand a chance of winning one of these, we are self judging again and the judging will take place between 12:00 and 13:00 on the sunday and only cars parked in the custom and modified rows at th...

taking off the foam and replacing the webbing is straight forward, drop me a PM with your email address and i can let you have a newsletter on making your own covers which cover the stripping and rebuilding the seat. As for your current covers you might have difficulties taking the clips off because...

chertsey minors are just up the road from you, i have used them and would happily recommend..
http://www.chertseyminors.co.uk/index.htm

my insurance company (RH) were fine charged 10 pounds for wedding cover for the day.

you are welcome david.

a few posts up a user has posted their email address... jumping to conclusion they might be the current owner.

drop me your email address in a PM and i can send you a newsletter about fitting them..

i can not help with the fitting of the boot but be aware if you have fitted an aftermarket hydraulic boot ram apparently they are so strong for the fiberglass boots can bend.

from what i recall the original mounts will not be ok, the gearbox tunnel is ok but the gearbox bell housing will need to be modified. I think the prop shaft will be too long. the fan will hit the radiator so the oil breather pipe will need to be modified as well. it might be worth considering takin...