Morris Minor Owners Club

many thanks

hi guys
looking for the bolt sizes as ringed on picture oil filter and alternator /dynamo

thanks for the constructive criticism guys as we all know not to work under a car supported only with a jack it was only made to lift the car up level to apply axle stands as for making them move to keep the angle correct might look into it but my idea came from the beam jack mot stations use,used t...

not sure what the boss would say LOL

hi
thought I would show my home made jacking beam (was busy at work on sat LOL) fits under the two front chassis legs

hi manged to get a 1275 flywheel and clutch (owner of engine had one!) any idea of the bolt threads for the flywheel had a look on 'Moss Europe' and they list this https://www.moss-europe.co.uk/bolt-flywheel-to-crankshaft-51k1029.html or this one https://www.moss-europe.co.uk/bolt-flywheel-6k630.htm...

again many thanks guys

hi again
i'm looking to store my new rebuilt engine what is the best way to keep it lubed!
don't really what to fill it up with oil or is that the best way ?
I was thinking of using some assy lube/oil just to keep things lubed
would blank any open holes etc

thanks for all the input with regards to my questions so if I manage to get a standard 1275 flywheel and a standard 1275 clutch assy it should be ok with a 1098 box? which clutch fork the 1098 one? and release bearing?? I have a ' Declan' rose jointed clutch linkage set up ready to install when the ...

hi all looking to sell this engine that I have had around for a while what's it worth ? its a 1098 cc Mg midget engine code 10cc it was in a shed for a few years before I acquired it but the owner removed the plugs!!! so I believe the rings have seized the pistons I have filled the bores with variou...

hi
where would I get the 1275 flywheel modded for the 1098 clutch set up??

hi all this must have been asked a few times over the years but here we go again I have finally got a 1275 midget engine newly rebuilt :D s-l1600.jpg s-l16001.jpg I'm planning to fit into my 1960 948cc minor any tips ie gearbox(1098?) clutch ,flywheel am I right in thinking starter will fit(new this...

hi all
looking to replace my old torque wrench
what should the torque range needed for the Morris?
and any suggestions on which would be best ??
cheers
Stu

ah the mystery is solved many thanks

hi all
quick question I bought a pair of front suspension swivel legs from the club spares stall at the nationals
this year
was off to fit them over the xmas hols and opened them up and one of the legs has two hole in it one for the steering arm
but what would the other be for?? any ideas

looking to get a new trolley jack what sort of size would I need
1.5 or 2 ton??
cheers

hi mate
what is the size of 'special' tool ?

hi all
this might be a daft question but im looking to work on my motor while the ign needs to be on
best to disconnect the coil wires to save it?
Stu

Hi all
I bought my tickets for the National show this year
from the online site here but I haven't had any confirmation
saying so has anyone else??
cheers
Stu

hi
sorry for the delay in response
yeah its a gen maniflow manifold and system
was just a bit concerned with the layout of the system
all ok now
cheers