Search found 3594 matches
- Sat Apr 22, 2023 1:44 pm
- Forum: Mechanical
- Topic: What's this then?
- Replies: 25
- Views: 5573
Re: What's this then?
Ha! :tu1: So it's not got anything to do with fuel after all. That “suitable for unleaded" text on there had me perplexed! Cheers chaps! Well technically there is a chance of fuel vapour getting in the pipe, which is why installation instructions usually say a U trap should be in the pipework....
- Sat Apr 22, 2023 1:15 pm
- Forum: Mechanical
- Topic: What's this then?
- Replies: 25
- Views: 5573
Re: What's this then?
Most cars in my experience, having a Servo, it's on the other side as less brake pipework needed.
But yes it's a Servo and remarkably it's the right way up.
But yes it's a Servo and remarkably it's the right way up.
- Fri Apr 21, 2023 9:31 am
- Forum: Mechanical
- Topic: Brake adjusters
- Replies: 4
- Views: 653
Re: Brake adjusters
Are the snail cam adjusters and masks identical for front and back brakes? One parts supplier has front ones not back ones listed but they look identical from the pictures. Quite simply, it depends on the year of car, or if an earlier car has been given the latter front brakes. When they fitted the...
- Wed Apr 19, 2023 12:43 pm
- Forum: Mechanical
- Topic: Front Brakes
- Replies: 10
- Views: 1351
Re: Front Brakes
myoldjaloppy has pretty much covered the matter of the brake components, but to answer your questions about bleeding.... I understand the pedal and pipe etc but do I pump all existing fluid out and then top up? Noooooo! The idea of bleeding is to get rid of any air in the system, the last thing to d...
- Wed Apr 19, 2023 10:41 am
- Forum: General Discussion
- Topic: Radiator Lettering
- Replies: 17
- Views: 5123
Re: Radiator Lettering
Seen a radiator where SCOLDING is used, instead of SCALDING!!🤣 Reminds me of this sign that I saw in the USA when I was working out there. It was put up in the new car park of a USAF base I worked on... IMG00135.jpg The same week they completed a new road junction and put this sign up.... :roll: :-...
- Tue Apr 18, 2023 11:11 am
- Forum: Mechanical
- Topic: Cold start Yes - Hot start No! Asdvice sought please.
- Replies: 36
- Views: 5747
Re: Cold start Yes - Hot start No! Asdvice sought please.
That is the 'breather', it's clearly identified on the Burlen/SU website diagram.
https://sucarb.co.uk/technical-h-type-c ... er-diagram
https://sucarb.co.uk/technical-h-type-c ... er-diagram
- Sun Apr 16, 2023 8:36 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1221
Re: indicator wiring
Ahh... I had an original 1970s Hazard Sw in my collection (having stored it for 40 years, I knew it would come in useful one day).... It has 4 outputs, so I just had to connect it to 2,3,6 & 7, a direct feed to each lamp. What we need to know is how your system was working before you tried to ad...
- Sun Apr 16, 2023 8:25 pm
- Forum: General Discussion
- Topic: Chassis number location 1966 convertible
- Replies: 14
- Views: 1778
Re: Chassis number location 1966 convertible
The Car/Body number was moved from the engine bulkhead to the driver's (RH) floor pan when the Elephant Trunk heater was put through the bulkhead in 1963 ish. The change took place later than that. I have a 1965 car with the later dashboard/black speedo and flick switches which has the chassis numb...
- Sun Apr 16, 2023 6:28 pm
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1221
Re: indicator wiring
The 8 connector relay is also clicking away there does not seem to be any power going to the the wires that feed the 4 corners, the no4 and no 8 connections on the relay come from the indicator switch, i put a test light light on these two connections and it lit up but no power reaching the rest i ...
- Sun Apr 16, 2023 5:58 pm
- Forum: General Discussion
- Topic: Chassis number location 1966 convertible
- Replies: 14
- Views: 1778
Re: Chassis number location 1966 convertible
The Car/Body number was moved from the engine bulkhead to the driver's (RH) floor pan when the Elephant Trunk heater was put through the bulkhead in 1963 ish. So of course many later cars have lost the stamped number when the floor has been replaced. As regards the other numbers on the top thin long...
- Sun Apr 16, 2023 5:54 pm
- Forum: General Discussion
- Topic: Radiator Lettering
- Replies: 17
- Views: 5123
Re: Radiator Lettering
My car doesn't have a Warning stencilled on the Radiator, but I've now got a High Top Rad to replace the later one that is currently fitted (car is SII). As there's been discussion about when the Warning was first applied, I thought I'd take a look through Ray's Original Morris Minor book. The only ...
- Sun Apr 16, 2023 3:52 pm
- Forum: Mechanical
- Topic: SU Fuel Pump won't stop pumping
- Replies: 8
- Views: 1594
Re: SU Fuel Pump won't stop pumping
If you can't see any fuel leaking, it's probably an air leak in the pump or the check valve letting fuel run back to the tank. The pump is quite simple, the central armature moves up and down against a light spring pressure, when the diaphragm can no longer move because the carb float chamber has sh...
- Sun Apr 16, 2023 11:57 am
- Forum: Electrical
- Topic: indicator wiring
- Replies: 10
- Views: 1221
Re: indicator wiring
Oh dear... I've typed all this once before and for some reason my PC closed the tab before I posted it :roll: Let's clear up some things. i have now got the indicators working and trying to fit a hazard switch all wiring to hazard switch sorted except the two wires that are supposed to go to the ing...
- Fri Apr 14, 2023 3:58 pm
- Forum: Electrical
- Topic: Dead electrical starting
- Replies: 12
- Views: 1244
Re: Dead electrical starting
Certainly a beast of a truck. I liked the fact that the compressor was linked directly to the tyres somehow. That's some complex pipework just to inflate the tyres from in the cab. Some of the British Military Bedford MKs had compressors inbuilt, but it was just a long airline in a long thin side bo...
- Fri Apr 14, 2023 10:38 am
- Forum: Mechanical
- Topic: Handbrake not working - slave cylinders won't slide
- Replies: 11
- Views: 801
Re: Handbrake not working - slave cylinders won't slide
There should be no problem just taking the wheel & brake drum off and then getting some grease in behind the cylinder. As Phill says, use White Grease; you can get it in a spray can which is ideal for all sorts of lubrication job, hinges, catches, etc and over the battery terminals too. Just be ...
- Tue Apr 11, 2023 3:43 pm
- Forum: Electrical
- Topic: Dead electrical starting
- Replies: 12
- Views: 1244
Re: Dead electrical starting
Is he meaning a pre-engaged starter? Hi-torque only refers to the amount of turning power available, not the bendix or pre-engagement arrangement. A 'High Torque' Starter has a gearbox attached to it. A modern electric motor spinning really fast, with a reduction gearbox to the output . Intention b...
- Fri Apr 07, 2023 3:45 pm
- Forum: Useful Tips
- Topic: Download of AKD 3575 / AKD3575
- Replies: 1
- Views: 2545
Download of AKD 3575 / AKD3575
Hi
I stumbled across this whilst checking out some part numbers.
Download of AKD 3575.
Body Service Parts List for Vans, Pick-ups, Cab/Chassis inc PO vans.
http://www.spridgetguru.com/TchIndx17_files/AKD3575.pdf
Of interest for anyone who might need one. It looks to be up to change/amendment 4.
I stumbled across this whilst checking out some part numbers.
Download of AKD 3575.
Body Service Parts List for Vans, Pick-ups, Cab/Chassis inc PO vans.
http://www.spridgetguru.com/TchIndx17_files/AKD3575.pdf
Of interest for anyone who might need one. It looks to be up to change/amendment 4.
- Fri Apr 07, 2023 3:32 pm
- Forum: Bodywork
- Topic: Number Plates (size, shape)
- Replies: 24
- Views: 3594
Re: Number Plates (size, shape)
Thank you. Yes it is evident from the zoomed in photo that it does go the other way around. I am incorrect. I had considered this but I was not sure. In that case, the number plate length is not critical. A distance piece is not supplied with the ESM fixings but a spring washer would probably be ab...
- Fri Apr 07, 2023 10:36 am
- Forum: Bodywork
- Topic: Number Plates (size, shape)
- Replies: 24
- Views: 3594
Re: Number Plates (size, shape)
I was unsure as to whether the backing plates were a factory figment or left to the whims of the supplying dealer - much like the style of number plate you got. They are illustrated and listed in the Morris Minor Body Service Parts List, AKD 3542. Note the Pt No as ADA 8891 :-? Number Plate.JPG ESM...
- Wed Apr 05, 2023 10:50 am
- Forum: Electrical
- Topic: Help I need a Wiring Diagram with Alternator
- Replies: 9
- Views: 1027
Re: Help I need a Wiring Diagram with Alternator
I've just looked back at Jaybeee1's past post, they don't bode well for the way this one is going.....