Morris Minor Owners Club

Hi
Does anyone know if new head studs, head nuts, and manifold nuts have been manufactured and by whom or who can I contact about these
Regards
Ian

See link

http://www.mmoc.org.uk/viewtopic.php?f= ... 69&start=0
I have similar shocks that were given to me but the crank has extra holes that some suggested were for a Riley 1.5 or A35
On eof them has a paper sticker wih ACA 4002 on it

Hi Bmc;; The armature end spindle is slightly offset as in when turning the brushes are moving side to side this was noticed when replacing brushes and rear bush bearing last year and now this year the dynamo does not put out the ign lamp although it does show it is charging but not enough but it wa...

Hi mike
I was thinking of putting the back plate with the greaser/ oiler of the C39 ( with new bush ) on the c40 and then putting the brush cover plate of the c39 onto the body of the c40 so that it looks like the original c39
Ian

Hi
Is it alright to replace a C39 dynamo with a C40 keeping the original screw terminal regulator
Ian

It was only the side valve engine that have to have a pump fitted that is hard to find
Ian

Put all wheel nuts back on and work on the stubborn ones first use a breaker bar as unless you have a good air pressure or an expensive air wrench (is it the impact type air wrench) it will not be a success. You can use soldering torch to get some heat to the nuts but may damage paint on wheels with...

Ha Ha Ha

I stripped some outer covering from electric cable and pushed over the end of the pins There are some of the proper fixings at this web address http://www.bresco.com/acatalog/Badge_Fixes.html The part looks like this you could push these over the pins without making the hole in the bonnet larger [fr...

I used short lengths of rubber tubing pushed on from the back. There are also proper badge fixings that are plastic which you push into the hole in the bonnet ( you will have to enlarge the hole ) and then you push the badge in
Ian

what about when you are under car welding and blob of weld goes in your ear you can hear the hairs singeing inside your ear :o as you struggle to get out from under the car before it exits out the other ear :o ,ooorrrr when you are laying on a large sheet of carboard to keep your back warm and the b...

Hi All This is the scene from the front of our house tonight.The OX Mountains in Co.Mayo Ireland alight over a large area, the second time in two months.Possibly the result of someone burning their bog or clearing scrub from their land,the vegetation is so dead and dry from the prolonged spell of fr...

Have you tried going back to the seller and asking for a replacement as the part was not fit for purpose

Take up woodturning and watch as a beautiful object appears from out of a lump of wood once you have mastered the tools it is relaxing too. Our club tent at a local show in 2009 with items turned by me[frame][/frame]

Hi All
Can someone explain how to use quotes in replys to topics . Is there a guide to using the" whistles and bells" on the site anywhere. I can upload pics and use smilies already
Thanks Ian

I am having the same problem for the last few days and it also seems to be switching off Bitdefender Antivirus on me
Ian

3M do a plastic fine line masking tape, if you use ordinary masking tape the paint creeps under the tape and leaves a ragged edge I think the other tape talked about was also 3M and you put the tape on which had a cover tape over two tapes a set distance apart but have not seen that for years
Ian

Hi Rob
My manifold studs are metric thread are you sure yours aren't as well
What is the reason for a Lambda sensor

Hi Keith How are the exhaust manifold coming along Just aquired these carbs and manifold off a Midget at a local autojumble on Sunday so looking forward to seeing pictures of the exhaust and the cost , and getting on to adapting carbs to fit I hope. Ian[frame] http://mmoc.org.uk/mbimage.php?src=1267...

No he means Woolies Trim