Morris Minor Owners Club

Spottedb this last night on a music channel...

https://www.youtube.com/watch?v=JYZNSyP9v9M

John ;-)

I think it must be the photos , but , apart from the sharpness of the " nose " , there seems to be more clearance in the "before" shot...

John ;-)

OK

John ;-)

Was going to fit lockable on both sides of my '58 four door,to go with the central locking , had the locks apart and made a right to a left but ended up not fitting it.
Will try to dig out the photos later.

John ;-)

EARLY , no hole in the door,the lock is in the handle..

John ;-)

The early doorlocks are ambidextrous , an anyone with a little skill can change them over...

John ;-)

From what I've read EFI'ing an A series is not easy , as the four cylinders have two shared ports....yes BL did it in the end...just before production ceased but do you know of any after-markets kits for the A series?

John ;-)

And the follow-up complicated 4wire video...https://www.youtube.com/watch?v=VGtImIP6j3A

Dear All I can't stand by and allow this to happen , yes,if it was only a tenner, people would learn a lesson , but at this price, it makes my blood boil , two wires..probably a resistor under the PCB, please share and save this scum ripping off others.. https://www.ebay.co.uk/sch/tuning-wizard/m.ht...

Chatty Alan Carr and Owain Wyn Evans can both go on the list...

And I'm not being Homophobic my wife is a male.

John ;-)

I'd swear by the old " add-on " Sparkrite systems , ( well I wouldn't swear by it , as it NEVER let me down ) , just clip onto the coil ( or fit elsewhere )...there was a three-way switch ( Off-Conventional-Electronic ) and a little lamp , which acts as a timing light. Excellent bit of kit...

This is where the Forum fails , I bet there are plenty of people reading this who are capable , and some probably just live round the corner from you , who would be pleased to come and fix it with you...

Your location please...

John ;-)
Manchester

Stabiliser....multi meter set on DC Volts , check input 12 to 13 volts , check output 10 volts with ref. to earth.

Gauge ??

John

P.S. Just edited my earlier , should ( and now does ) read GUAGE ( not sender ).

" RE torquing. Yes, Absolutely did! To 45ft lbs (I believe) in the sequence as per the manual. I bought a torque wrench especially "

Does that mean you re-torqued the head bolts after the first heat-cycle?

John ;-)

" with the speedo out and propped up in the aperture while I checked the blower, I saw a slight wisp of smoke " IMHO you've smoked the fuel gauge , the case should be properly earthed for it to function correctly , and I may be corrected here , and hope I am , but If you apply 12Volts and ...

Pottering around, 50 miles , all in one go or lots of short trips?

John ;-)

Agreed..

John ;-)

It is in place to ease the Goverments conscience over any motorway deaths...

John ;-)

I think you'll have to get your Binoculars on...it'll be in the small print of your policy.

John ;-)

Maestro '83-'85, SU HIF44 , I think..

John ;-)