Search found 613 matches
- Thu Jul 03, 2008 6:56 pm
- Forum: Off-Topic
- Topic: Minors in the Movies
- Replies: 15
- Views: 4200
- Mon Jun 30, 2008 2:00 pm
- Forum: Bodywork
- Topic: Front quarter light window catch
- Replies: 11
- Views: 3591
- Mon Jun 30, 2008 1:54 pm
- Forum: Mechanical
- Topic: ALTERNATIVE MASTER CYLINDER FITMENT
- Replies: 15
- Views: 3597
Another approach that one of our memebers has done is to mount the master cylinder on top of the chassis leg in the engine bay. The standard pedal can be use but flip the clevis around and fabricate a linkage that goes forward through the chassis leg to another pivot point that rotates a lever in or...
- Fri Jun 27, 2008 6:08 pm
- Forum: Mechanical
- Topic: Reverse Rims
- Replies: 48
- Views: 10847
I made a pair of them years ago. Minor wheels (At least through Series III) are riveted together. I then located a pair of 14 inch wheels that also were riveted and removed the center. The diameters were a little different so I sandwiched some sheet steel between and riveted everything back together...
- Thu Jun 26, 2008 3:58 pm
- Forum: Mechanical
- Topic: Rear Spring replacement
- Replies: 10
- Views: 2783
I'm sorry, my memory failed me. The C clamp will not work. A little hammering and prying under the plate does the trick. I don't remember if the bushing will fit through the hole of the pin if not you need the larger diameter of the hole created by the plate removal. In any case there needs to be a ...
- Thu Jun 26, 2008 1:39 pm
- Forum: Bodywork
- Topic: POR-15, worth the money?
- Replies: 14
- Views: 5178
- Thu Jun 26, 2008 1:36 pm
- Forum: Bodywork
- Topic: Front quarter light window catch
- Replies: 11
- Views: 3591
- Thu Jun 26, 2008 1:31 pm
- Forum: Mechanical
- Topic: Rear Spring replacement
- Replies: 10
- Views: 2783
- Thu Jun 19, 2008 9:58 pm
- Forum: General Discussion
- Topic: New to the forum.
- Replies: 4
- Views: 1265
New to the forum.
Cheers, after visiting sites of my daily cars and noticing our club in the States, Morris Minor Registry is only by print, I did a quick search and here I am. I've been playing Morris for forty some years now, so I know my way around and am the technical advisor for our club here. I'll pop in here o...
When you think about this issue, it becomes even more bazaar. Remember the 4 door/LCV came along later, so if that style lock/handle was the new improved (BMC?) style, were there thoughts of incoprorating a lock in both sides? Then why didn't they do it until Series V? Why not use the same assembly ...
- Thu Jun 19, 2008 8:33 pm
- Forum: Mechanical
- Topic: Greasing suspension
- Replies: 13
- Views: 4202
Let me explain further. The jacking should be done so that there is very little change is the suspension geometry. Place the jack as far out as possible. Normally the car is 'hanging' from the lower trunnion, such that the bearing surfaces are the top side of the male thread profile and the lower si...
- Thu Jun 19, 2008 8:04 pm
- Forum: Mechanical
- Topic: Clutch Linkage?
- Replies: 20
- Views: 4777
- Thu Jun 19, 2008 7:42 pm
- Forum: Mechanical
- Topic: Greasing suspension
- Replies: 13
- Views: 4202