Search found 2625 matches

by kennatt
Tue Apr 21, 2009 8:18 am
Forum: Mechanical
Topic: rims and modern tyres
Replies: 9
Views: 2220

tom roys stock the larger valves,just got four.
by kennatt
Mon Apr 20, 2009 7:27 am
Forum: Mechanical
Topic: Additive, four star or nothing?
Replies: 85
Views: 11311

katie.Honestly don't bother with any additives I have had my split screen for 25 years, (About 90thous mile) and when leaded was removed just used unleaded since that time. I've had to adjust the tappet clearences two of three times . Last year I had the engine out to have a look at the bearings and...
by kennatt
Sun Apr 19, 2009 10:35 am
Forum: Other
Topic: Seat problem
Replies: 14
Views: 2361

katie If you have a look underneath you will see where the reinforcing u shaped bracket is where the seat bolts come through I think you will find that you can gain an inch or so by drilling a new hole and putting a nut on the bolt. However then the seat would probably be too far forwards for you,As...
by kennatt
Fri Apr 17, 2009 8:40 am
Forum: Bodywork
Topic: Splitscreen window rubber replacement!?
Replies: 10
Views: 1697

I'll tell you now(Having been there three times) the replacement rubbers are more than useless,they do not fit,the slots are too tight and they don't close up onto the car frame at the corners,and therfore don't seal properly ,its time the suppliers did something about getting a better pat ern.There...
by kennatt
Tue Apr 14, 2009 7:59 am
Forum: Mechanical
Topic: Fuel problem (I think)!
Replies: 4
Views: 885

try pulling the choke out a bit and see if that improves it.Then you know its fuel related.
by kennatt
Tue Apr 14, 2009 7:52 am
Forum: Electrical
Topic: What part is this?
Replies: 10
Views: 1495

behind the drivers side glove box
by kennatt
Sun Apr 12, 2009 7:48 pm
Forum: Mechanical
Topic: Help! Starting problem!
Replies: 32
Views: 3841

Katie I replied earlier but its gone somewhere. The coil will get hot if the ignition is left on without the engine running. In simple terms the coil stores and builds up energy to fire a charge down the plug leads to create a spark at the pug tips. It holds this energy until the points open and the...
by kennatt
Sun Apr 12, 2009 8:15 am
Forum: General Discussion
Topic: why
Replies: 21
Views: 3354

roy spot on only legal if you only drive the car now and again don';t do it, full of pitfalls for instance if you were stopped and had a defect on the vehicle like worn tyre not only do you get done but your mother as well since she is the owners(Has to be to insure it)and is done for permitting or ...
by kennatt
Sun Apr 12, 2009 8:03 am
Forum: Mechanical
Topic: leaf springs
Replies: 33
Views: 3657

impossible to say untill they are on the car under load,could by ok could be sagging and done for. If I was doing a rebuild for the cost of the springs about £ 30 each I would change them But your call Certainly wouldn't want to fit them and then have to take them off again.You're probably going to ...
by kennatt
Sun Apr 12, 2009 7:54 am
Forum: Electrical
Topic: Firing order problem?
Replies: 13
Views: 11398

katie,pull the lead from the coil (Middle one)Out of the distributor and take off the distrbutor cap ,Hold the free end of the lead with insulated plier close to the engine block but not touching make sure the points are closed by turning the engine (Use the fan blades)and with a screw driver push t...
by kennatt
Sat Apr 11, 2009 8:18 am
Forum: Bodywork
Topic: Paint job
Replies: 16
Views: 2972

katie, depends on how much of the car needs doing,usually the roof and bonnet can be just polished up,Im in eaglescliffe near stockton if you want me to have a look at yours pm me and get it to me,If its just wings and door or doors and you buy all the material,I'll spray them over for you for about...
by kennatt
Fri Apr 10, 2009 9:13 am
Forum: Bodywork
Topic: MIG WELDING
Replies: 27
Views: 5959

one thing to consider is if you will be using it outside,If most of your welding is to be done outside you need to use the gas less type because if not then you will be limited to windless days,If its windy then the wind blows the gas off the weld and you can get poor quality welds.I have both types...
by kennatt
Fri Mar 27, 2009 7:25 am
Forum: General Discussion
Topic: Preferred Insurer?
Replies: 36
Views: 4937

did RH last month £72 fullycomp,windscreen cover unlimited milage 30 days eu cover windcsreen cover,breakdown,buy back salvage.beat every other cover
by kennatt
Thu Mar 26, 2009 7:32 am
Forum: Mechanical
Topic: Early failure of leaf springs?
Replies: 15
Views: 1583

if they were new springs not just old reshaped and temperd(Not worth the bother)they should last for years,get back onto the dealer and talk to him about warrantees etc.
by kennatt
Thu Mar 19, 2009 8:18 am
Forum: Other
Topic: Tyres
Replies: 41
Views: 5926

are they nankings by chance,got a similar deal from tom roys last month,The only thing I found was that they were a bit soft walled and I had to put 29psi to stop an anoying bouncyness.When I pushed on the back you could see the rear bounce three or four times,but with the car on the trolly no sign,...
by kennatt
Thu Mar 19, 2009 8:10 am
Forum: Other
Topic: Faulty chrome on rear lamp base.
Replies: 34
Views: 8521

reverse chroming :o :o that must be why both my front and rear hinges pitted after about 18 months and only done 150 miles and dry stored inside,Must be a secret electrical connection for the heating element fitted to stop them frosting up in winter :D :D
by kennatt
Sun Mar 15, 2009 8:39 am
Forum: Mechanical
Topic: 7" to 8" brakes on front
Replies: 13
Views: 1838

yes same,just done mine,vast improvement over7".
by kennatt
Sat Mar 14, 2009 8:26 pm
Forum: Mechanical
Topic: telescopic rears
Replies: 3
Views: 655

telescopic rears

is there any benefit from a telescopic conversion my rear lever arms are about shot and i'm considering a conversion.Cheers.
by kennatt
Sat Mar 14, 2009 7:48 am
Forum: General Discussion
Topic: How does one remove the bumpers and aprons?
Replies: 6
Views: 1592

two large nuts behind bumper on a shaft that goes into the body but they will be rusted solid unless they have been off recently,then bumper and apron lift off as a unit
by kennatt
Thu Mar 05, 2009 8:36 am
Forum: Other
Topic: Series 2 front seats need lowered?
Replies: 13
Views: 2254

something odd here,Ive actually raised the rear of my seat cos I was too low and I'm also50 50 proportioned,Mybe non standard minor seats,from A35 or something strange problem