Morris Minor Owners Club

Chips with ketchup

not

Fairy

Fitted the starter dog with no problem
However, I would need to be Popeye to spin this 1275 over
I may need to add a little more crank into my starter handle..

Dastardly

Fighter

Got it
Terry’s Chocolate Orange segment...
Is there enough room to tap it down after the starter dog is installed or do you deform it before it is screwed on ?

Ok
I can’t see anything like that on the pic I posted
I will try and clean up the area and have another look
I’ve only removed the rad so access is a bit limited

https://www.morrisminorspares.com/engine-c14/ohv-engine-c16/crankshaft-pulley-lock-washer-p830481 “One part of the locking washer is knocked/pressed into the hollow located in the front face of the pulley” I have ordered the one from ESM I’m not quite sure what you mean regarding the above Phil I c...

Willie

Islington

Yep
I would agree Phil re the ratchet

Starter trick has always worked for me, you need to leave an inch or two clearance so the starter can get some momentum into the engine and thus give the bolt a good whack. I’ve been messing about trying to get the bolt out of mine to fit a starter dog and eventually tried the starter method. It’s ...

it’s a knockout

Is it loud enough ?

If you've already got a 12v outlet could you swap it for a combined 12v and USB? I fitted something like this in a black plastic case under the glovebox. https://www.12voltplanet.co.uk/12v-24v-dual-recessed-power-socket-twin-usb-5v-21a-cigar-lighter.html We used to connect a Bluetooth speaker to on...

Mrs Peel

Hill

Write

Austin I think