Search found 2528 matches
- Sat Jan 27, 2024 11:04 am
- Forum: Bodywork
- Topic: molding rear arches rather than piping
- Replies: 4
- Views: 612
Re: molding rear arches rather than piping
Well, someone may have done this successfully but, until they pop up on here and tell us, I would advise against it.
- Sat Jan 27, 2024 10:57 am
- Forum: General Discussion
- Topic: Horn wiring - 1953 Series II
- Replies: 17
- Views: 1107
Re: Horn wiring - 1953 Series II
Are you sure the push button itself is providing a dead short when pressed? And its peripheral contact to the column's hub is good? Yes, I would be checking those. In any case its not difficult to remove the steering wheel - assuming you have the correct socket (I believe it is 3/4 whitworth, altho...
- Thu Jan 18, 2024 3:26 pm
- Forum: Mechanical
- Topic: Diff Breather
- Replies: 4
- Views: 590
Re: Diff Breather
Can't see what's 'destructive' about unscrewing the breather by means of a screwdriver fitted into the slotted head. In any case, the tube, the hole in the tube and the space underneath the cap were pretty much as clean as a whistle. I made sure the drain holes in the brake back plates were clear wh...
- Wed Jan 17, 2024 4:53 pm
- Forum: Mechanical
- Topic: Diff Breather
- Replies: 4
- Views: 590
Re: Diff Breather
Thanks Phil, I'll get me screwdriver out! Makes it easier than the modern plastic ones without a slot in the cap
I doubt this one will dismantle, but we'll see....
I doubt this one will dismantle, but we'll see....
- Wed Jan 17, 2024 2:58 pm
- Forum: Mechanical
- Topic: Diff Breather
- Replies: 4
- Views: 590
Diff Breather
So long since I've done this, I've forgotten...... I want to check the diff breather is clear. I can see the breather near the top of the diff casing. Its an old metal one and appears to have a groove in the cap, which I assume is for unscrewing the thing. Is it as simple as that - use a screwdriver...
Re: Tyre Wear
My wheels rotate every time I drive the car
But seriously, I don't know how many miles. The other tyres seem pretty good. Maybe it was a fault in the tyre?
But seriously, I don't know how many miles. The other tyres seem pretty good. Maybe it was a fault in the tyre?
- Mon Jan 15, 2024 10:41 am
- Forum: Mechanical
- Topic: Can’t get my daughters car to start
- Replies: 163
- Views: 14913367
Re: Can’t get my daughters car to start
Oh, so its not the end of this thread!
- Sun Jan 14, 2024 10:27 am
- Forum: Electrical
- Topic: Lumenition Optronic PMC-50 (positive earth)
- Replies: 14
- Views: 39026
Re: Lumenition Optronic PMC-50 (positive earth)
I just keep a spare set of points, Les. Never needed them.........
Re: Tyre Wear
Well, I couldn't find anything wrong so I took the car to a local classic car garage. They couldn't find anything wrong either. Its taken 10 years to wear to this point so, as its still within legal limits, I've put it in the boot as the spare and see how it goes.
- Fri Jan 12, 2024 4:20 pm
- Forum: Mechanical
- Topic: Can’t get my daughters car to start
- Replies: 163
- Views: 14913367
Re: Can’t get my daughters car to start
Fantastic! And end of this thread hopefully!
- Wed Jan 10, 2024 6:41 pm
- Forum: General Discussion
- Topic: dual circuit brakes
- Replies: 16
- Views: 123324
Re: dual circuit brakes
The OP says he is looking "for a solution" but doesn't say to what..... I know that all of us drive modern cars which have dual circuit braking systems but have we ever actually needed them? I haven't. I have driven a Morris Minor for more than 50 years fitted with standard drum brakes an...
- Tue Jan 09, 2024 6:14 pm
- Forum: General Discussion
- Topic: Planning a long trip
- Replies: 19
- Views: 294388
Re: Planning a long trip
I see. Thanks. PM sent......
- Tue Jan 09, 2024 3:30 pm
- Forum: General Discussion
- Topic: Planning a long trip
- Replies: 19
- Views: 294388
Re: Planning a long trip
Whereabouts in Cornwall are 'ee, Paul? Truro/Falmouth is a bit vague - unless you live on the branch line train!
I'm in Truro itself.
Cheers,
Pete
I'm in Truro itself.
Cheers,
Pete
Re: Tyre Wear
Any specific bushes, Phil?
- Mon Jan 08, 2024 1:21 pm
- Forum: Mechanical
- Topic: Can’t get my daughters car to start
- Replies: 163
- Views: 14913367
Re: Can’t get my daughters car to start
Well, any of that is possible, its hard to know from a distance. On the other hand, these two ladies seem reluctant to actually use the choke (stories about starting up without choke when the car has been "covered in ice", or left out in winter for hours etc.). I have pointed out previousl...
- Mon Jan 08, 2024 11:13 am
- Forum: Mechanical
- Topic: Manifold flange thickness
- Replies: 7
- Views: 37532
Re: Manifold flange thickness
Brilliantly simple solution!
Re: Tyre Wear
I'll get it checked out.....
Tyre Wear
Hello peeps,
I noticed my front O/S (driver's side) tyre is wearing smooth on its outer edge only. All the other tyres look OK. Any thoughts?
I noticed my front O/S (driver's side) tyre is wearing smooth on its outer edge only. All the other tyres look OK. Any thoughts?
- Sat Jan 06, 2024 4:20 pm
- Forum: Mechanical
- Topic: Can’t get my daughters car to start
- Replies: 163
- Views: 14913367
Re: Can’t get my daughters car to start
Well, maybe 'olonas' will come along dreckly and clarify everything!
- Sat Jan 06, 2024 8:57 am
- Forum: Mechanical
- Topic: Can’t get my daughters car to start
- Replies: 163
- Views: 14913367
Re: Can’t get my daughters car to start
Here you go Bill - earlier in the thread, 'Exasperant' wrote "If you've got the starting handle...." 'Olonas' would prefer "If you have a starting handle...."
Relates to the 'Changing Language' thread as well.
Relates to the 'Changing Language' thread as well.