sunvisors

Post by **grumpygrandad** » Sat Jun 28, 2008 6:09 pm

hello how much could i expect to pay for an external sunvisor for my morris, 1000, SALOON.in steel or i think many years ago you could get one probably made from perspecs, in green , thanks ,grandad

Post by **aupickup** » Sat Jun 28, 2008 6:10 pm

original steel about £200.00

Post by **ASL642** » Sat Jun 28, 2008 6:52 pm

I believe you can still get the perspex ones. They used to come from the Birmingham MM Centre. I dont know if they still do them though.

Post by **britany** » Sat Jun 28, 2008 7:05 pm

Hello Grandad
I bought mine www.morrisminor.dk
pict at Miscellaneous
Hope help
Dan

Post by **grumpygrandad** » Sat Jun 28, 2008 10:53 pm

aupickup wrote:original steel about £200.00

thank you but just spent a fair bit doing engine up, looks like i will have to wait abit,thankyou, grandad

Post by **grumpygrandad** » Sat Jun 28, 2008 10:55 pm

regaliaqueen wrote:I believe you can still get the perspex ones. They used to come from the Birmingham MM Centre. I dont know if they still do them though.

i will enqiure but may be to much for me at the moment. thank you, grandad

Post by **d_harris** » Sat Jun 28, 2008 11:11 pm

There was one of the perspex ones I spotted at the national for £20, I very nearly had it too. Decided that couldn't justify it at the mo.

Post by **grumpygrandad** » Sat Jun 28, 2008 11:30 pm

Dan_Harris wrote:There was one of the perspex ones I spotted at the national for £20, I very nearly had it too. Decided that couldn't justify it at the mo.

does any thing ever ever come at the right time. grandad

Post by **IaininTenbury** » Sun Jun 29, 2008 12:24 am

aupickup wrote:original steel about £200.00

There's a company in Yorkshire make repro steel ones for about £140 I believe. No personal involvement or connection.
I had an original steel one on the stall at the national all weekend for £130 and it didn't sell, there were at least two other original ones there for between £150 and £180 - not sure if they went, but as mine was by far the cheapest and didn't sell it gives an idea of supply and demand...
I'll take mine to the shotblasters this week and spray it with all the other bits to on the van rebuild as no one wanted it

Post by **grumpygrandad** » Sun Jun 29, 2008 10:15 am

HELLO i know the metal one is the one to fit but i prefere the plastic ones but either would do , thanks grandad

Post by **IaininTenbury** » Sun Jun 29, 2008 11:35 pm

Quite like the perspex ones myself. I was just setting the record straight bout whats available and the going rate for the steel ones as someone had mentioned it ie: you can get them for a lot less than £200

Post by **grumpygrandad** » Mon Jun 30, 2008 7:15 am

IaininTenbury wrote:Quite like the perspex ones myself. I was just setting the record straight bout whats available and the going rate for the steel ones as someone had mentioned it ie: you can get them for a lot less than £200

hello again thank you i will have to see what comes along