Use Solvol Autosol if they are only lightly oxidised/corroded, or a rotary polisher if heavily corroded. You'll then need to either repeat the polishing every few weeks, or spray them with clear coat lacquer to seal them.Maximas wrote:On a different note what's the best way to polish them...and with what....mine are dull..also those centre caps ..do they push on or do you take the wheel off then push them on from the inside...with thanks
Yes, the centre caps push through from behind, though often get stuck in place, as the caps are steel and cause electrolytic corrosion.
A good tip is to use silver aerosol lids which fit most of the centre bores, and don't corrode; they are held in with a bead of silicone sealant on the back. These are the ones I fitted to mine:
