help needed for first purchase
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Newbie
- Posts: 4
- Joined: Mon May 26, 2014 1:19 pm
- MMOC Member: No
help needed for first purchase
hello , I am going to view a 1968 minor next week that has been part restored , was hoping someone could list some things to keep a special eye out for as I have never owned one before.
I am a trained mechanic so know the obvious things and already own a classic mini , just need some specialist advice....
many thanks in advance
AJ
I am a trained mechanic so know the obvious things and already own a classic mini , just need some specialist advice....
many thanks in advance
AJ
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
Re: help needed for first purchase
hi and welcome. If you put up your location someone may be able to go with you and look at car with you.
regards Ian
regards Ian
Re: help needed for first purchase
Welcome to the forum! If you have a Mini - then you will know that RUST is the enemy. Look under the carpets, under the front seats to see if the suspension is coming up through the floor...., under the rear seat squab to see if the rear spring mounts are coming through...., boot floor - sills and crossmembers -and front suspension legs where the lower arms bolt through. As with the Mini - the mechanical condition is not important - it can all easily be fixed. Rust is 10 times more difficult and expensive to deal with. If you tell us where you are - where the car is - someone local may be willing to go along with you and point out the known trouble areas. Good luck with it! Post up some pictures.....
-
- Minor Friendly
- Posts: 92
- Joined: Thu Feb 17, 2011 6:04 pm
- Location: Bournemouth, Dorset, UK
- MMOC Member: Yes
Re: help needed for first purchase
Our website (Dorset Branch) has some buyers guides which might be useful;
http://dorsetmmoc.co.uk/wordpress/technical/
http://dorsetmmoc.co.uk/wordpress/technical/
-
- Newbie
- Posts: 4
- Joined: Mon May 26, 2014 1:19 pm
- MMOC Member: No
Re: help needed for first purchase
thanks a lot for your welcome and advice , I am in reading , Berkshire , is there a branch of the owners club anywhere close ?
the seller has replaced the front subframe along with all panels , seals and even resprayed altho not a great job , he has a nice red interior and spare set of window glass , and is even throwing in a marina engine.
it is half way through a brake disc upgrade but has no mot - can get for £500 - sounds like a good deal to me ?
the seller has replaced the front subframe along with all panels , seals and even resprayed altho not a great job , he has a nice red interior and spare set of window glass , and is even throwing in a marina engine.
it is half way through a brake disc upgrade but has no mot - can get for £500 - sounds like a good deal to me ?
Re: help needed for first purchase
sounds a good deal....
marina engines seem to fetch a good price..
so you could sell it and end up with a bargain
what ever you do good luck
marina engines seem to fetch a good price..
so you could sell it and end up with a bargain
what ever you do good luck
Re: help needed for first purchase
Minors don't HAVE a front subframe (nor a rear) - so take anything he tells you with a huge pinch of salt.......
Re: help needed for first purchase
It sounds on the face of it, a good buy, but as said, check carefully for the full extent of the amount of work that needs doing.
There are numerous MMOC branches up and down the country:
http://www.mmoc.org.uk/index.php?page=531
There are numerous MMOC branches up and down the country:
http://www.mmoc.org.uk/index.php?page=531
Maurice, E. Kent
(1970 Traveller)
(1970 Traveller)
-
- Minor Fan
- Posts: 472
- Joined: Mon Nov 18, 2013 11:07 am
- Location: Oxfordshire
- MMOC Member: No
Re: help needed for first purchase
so take anything he tells you with a huge pinch of salt.......[/quote]
Take ANYTHING that ANYONE tells you with a pinch of salt!
As you're a mechanic, you should know good welding when you see it. If all the metalwork repairs are of a good quality and look 'right' then you're off to a good start. Hopefully none of the welding is out of allignment which could set you back further down the line if you have to rectify it.
For the price, just make sure everything is there and you should have a good project to work on. If its in the middle of a disc brake conversion, ask when the front suspension was last rebuilt/inspected. King pins and trunions do wear and can fail.
Take ANYTHING that ANYONE tells you with a pinch of salt!
As you're a mechanic, you should know good welding when you see it. If all the metalwork repairs are of a good quality and look 'right' then you're off to a good start. Hopefully none of the welding is out of allignment which could set you back further down the line if you have to rectify it.
For the price, just make sure everything is there and you should have a good project to work on. If its in the middle of a disc brake conversion, ask when the front suspension was last rebuilt/inspected. King pins and trunions do wear and can fail.
Glad to be back!
-
- Newbie
- Posts: 4
- Joined: Mon May 26, 2014 1:19 pm
- MMOC Member: No
Re: help needed for first purchase
yeah point taken , I think he actually said cross member not subframe !!
is the chassis plate easily viewed and located to check numbers tally ?
is there anything to look out for regarding the electrical system ?
all help and advice is greatly received
AJ
is the chassis plate easily viewed and located to check numbers tally ?
is there anything to look out for regarding the electrical system ?
all help and advice is greatly received
AJ
-
- Minor Addict
- Posts: 565
- Joined: Tue Jul 09, 2013 9:44 pm
- Location: West Midlands
- MMOC Member: Yes
Re: help needed for first purchase
For identification locations see:movistar600 wrote:is the chassis plate easily viewed and located to check numbers tally ?
http://www.mmoc.org.uk/viewtopic.php?f=1&t=55165
-
- Newbie
- Posts: 4
- Joined: Mon May 26, 2014 1:19 pm
- MMOC Member: No
Re: help needed for first purchase
thanks for the info qwerty165 , I went to view and all chassis and engine number match.
it is a bit tatty but floor and cross member looks solid.
slight corrosion in boot floor
it also has had a rear suspension conversion , with a clamp fitted around the leaf spring - whats your thoughts on that ?
there is oil from the gearbox area - is this common ?
it is a bit tatty but floor and cross member looks solid.
slight corrosion in boot floor
it also has had a rear suspension conversion , with a clamp fitted around the leaf spring - whats your thoughts on that ?
there is oil from the gearbox area - is this common ?