Improvised parts cleaner

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
ianmack
Minor Addict
Posts: 835
Joined: Sat Jul 05, 2014 7:02 pm
MMOC Member: Yes

Improvised parts cleaner

Post by ianmack »

See this link for a minimal cost and non bulky part cleaner . My own attempt is just starting a test run, I'll let you know how it goes. http://www.classicbikeforum.co.uk/viewt ... =27&t=3358
RobThomas
Minor Legend
Posts: 2646
Joined: Thu May 11, 2006 10:34 am
Location: Cardiff
MMOC Member: Yes

Re: Improvised parts cleaner

Post by RobThomas »

Dishwasher? :D
Cardiff, UK
ianmack
Minor Addict
Posts: 835
Joined: Sat Jul 05, 2014 7:02 pm
MMOC Member: Yes

Re: Improvised parts cleaner

Post by ianmack »

Dishwasher? Well it's a posibility. What does Mrs Thomas say?
BrianHawley
Minor Fan
Posts: 404
Joined: Tue Nov 08, 2016 1:38 pm
Location: Yanbu Al-Sinaiyah, Saudi Arabia (temporary posting)
MMOC Member: Yes

Re: Improvised parts cleaner

Post by BrianHawley »

I've put a mini head in a dishwasher before now. Works fairly well.

A bit tight for a gearbox.
Brian

Image "Jodie". '67 Traveller, 1275, discs, suspension mods etc.
StillGotMy1stCar
Minor Fan
Posts: 434
Joined: Wed Jun 07, 2017 11:37 pm
Location: Carmarthenshire
MMOC Member: No

Re: Improvised parts cleaner

Post by StillGotMy1stCar »

That's probably better than the Chinese one I bought from an Internet auction site. Used it twice and it blew up. They fobbed me off about replacing when they've new stock, playing for time so I couldn't open a case for a refund. So I got stuck with a paper weight.
 I did get it going though by replacing the blown transistors and diodes for better type and I had to rewind the oscillator transformer, whilst I was at it replaced the soldered in 10 amp fuse with a fuse holder and a more suitable 1 amp fuse.
Shouldn't be allowed to import such unsafe rubbish.
Will be interesting to see how well yours works, should be good as it will have extra agitation.
Great for cleaning orifices. :o
Regards John.
ianmack
Minor Addict
Posts: 835
Joined: Sat Jul 05, 2014 7:02 pm
MMOC Member: Yes

Re: Improvised parts cleaner

Post by ianmack »

After a test run followed by a soak the test piece is functionally pretty clean although not exactly gleaming. However it is an old Russian carburettor so perhaps a gleam is too much to expect. I bought the sander years ago when bargain power tools were still a novelty, its never been a very good sander so I'm glad to have found a use for it at last. The snags are that it is quite noisy and if your box is shallow the movement creates tiny splashes which lose some of the fluid during an hours run. And if you do it in July wasps love cola!
TDV102
Minor Addict
Posts: 641
Joined: Fri Oct 16, 2015 5:16 pm
Location: North Yorkshire
MMOC Member: No

Re: Improvised parts cleaner

Post by TDV102 »

Bucket of hot water, dishwasher tablet. Leave overnight, rinse with pressure hose. Works for me.
Good home offered for custom splittie
olderisbetter
Minor Addict
Posts: 554
Joined: Sun Apr 19, 2015 6:07 pm
MMOC Member: No

Re: Improvised parts cleaner

Post by olderisbetter »

TDV102 wrote:Bucket of hot water, dishwasher tablet. Leave overnight, rinse with pressure hose. Works for me.
My exact method of washing up at the moment.. :oops:

ianmack
Minor Addict
Posts: 835
Joined: Sat Jul 05, 2014 7:02 pm
MMOC Member: Yes

Re: Improvised parts cleaner

Post by ianmack »

Update, two days later and I still have wasps buzzing around the workshop. Probably not a good idea to use cola in midsummer. I cleaned up as best I can, but it doesn't take much sugar to make a wasp happy :roll:
Post Reply