So as not to drift Kevin s thread any further I've started a new one..having bought new springs ( 5 leaf) to replace the old springs ( 7 leaf) , which I could swear were made of concrete , was looking into wrapping the springs..and so..
Decided on Denso Tape ( or next best ) and managed to pick up some "oilcloth" at the last auto-jumble , the springs were soaked for a while in oil then fitted to the axle and while in place neoprene packing added to the spring guides then wrapped in "Denso " tape , the outer wrap was the "oil-cloth" just to keep things in place and covered.
Photos...
References
viewtopic.php?f=28&t=50121&start=260
http://www.wefco-gaiters.com/
https://www.ebay.co.uk/itm/50mm-X-10m-R ... 2749.l2649
One roll was more then enough to do both springs..
Comments?
John
Leaf springs
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1377
- Joined: Tue Mar 26, 2013 8:20 pm
- Location: Chelmsford, essex
- MMOC Member: No
Re: Leaf springs
looks fine to me, this is what I had on my Landie for many years and they were fine inside when I eventually replaced the tape.