Hi All,
More a random thought than anything else, but is there any reason new doors aren't available from the big suppliers? Pretty much every other panel seems available (apart from maybe the bonnet) and i thought the suppliers bought all tooling - are they just to cumbersome/complicated?
door availability
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Maniac
- Posts: 10818
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: door availability
Outer door skins are sometimes available:-
http://www.morrisminorspares.com/body-i ... nv-p828435
Because of the cost of the door outer skin it is nearly always cheaper to skin the bottom of the door.
Not all pressing moulds became available when BMC/BL ceased trading.
Henric obtained some of the pressing moulds some of which were eventually taken over by ESM.
http://www.morrisminorspares.com/body-i ... nv-p828435
Because of the cost of the door outer skin it is nearly always cheaper to skin the bottom of the door.
Not all pressing moulds became available when BMC/BL ceased trading.
Henric obtained some of the pressing moulds some of which were eventually taken over by ESM.