Page 1 of 1

Petrol filler problem

Posted: Mon Jun 24, 2019 7:56 pm
by Stevearniepalmer
I filled up with petrol on Saturday having driven from home to the national.When I got in the car on Sunday there was a distinct smell of petrol.Some helpful chaps in my local branch had a look and they discovered that fuel has been leaking from the part just underneath where the petrol goes in.I bought the piece of hose that needs replacing but can someone tell me if it makes a difference having a locking petrol cap?Also the ‘clips that are on there look quite old but I can’t find a replacement on any of the usual websites.If they need replacing will jubilee clips of the right size be ok.
It has obviously been leaking for some time because it had started to soften the under seal WHAT A MESS.

Re: Petrol filler problem

Posted: Mon Jun 24, 2019 8:03 pm
by philthehill
The original type wire clips are available from MOSS :-

https://www.moss-europe.co.uk/clip-hose ... soc=138531

You can use banded clips (jubilee) but use a type with rolled edges so as not to cut into the rubber pipe.

Re: Petrol filler problem

Posted: Mon Jun 24, 2019 8:08 pm
by Stevearniepalmer
Thanks philthehill I will make sure I use them or jubilee with the rounded edge .When I’ve done it I shall report back!

Re: Petrol filler problem

Posted: Tue Jun 25, 2019 7:19 am
by win
Stevearniepalmer
If you are still unsure how to change the connecting tube, I will help you at the next meeting, just keep your fuel level lower.
Regards Win

Re: Petrol filler problem

Posted: Tue Jun 25, 2019 4:38 pm
by Stevearniepalmer
Hi Win
I’m going to have a go on Thursday I reckon I will be able to do it but if I get stuck I will bring Audrey on Thursday next week to the meeting
Cheers
Steve

Re: Petrol filler problem

Posted: Thu Jun 27, 2019 3:42 pm
by Stevearniepalmer
Hi all Success!!
I’ve managed to remove the old pipe and fit the new one.Of course I won’t know if its ok until I put some fuel in but all looks good so far. Job done😀

Re: Petrol filler problem

Posted: Thu Jun 27, 2019 8:31 pm
by win
Well done Steve.
Regards Win