Hi everyone
Been doing a rebuild on my 948 engine and wanted to try and find an alloy rocker cover with the breather, although can’t seem to find one anywhere! The only ones I can see don’t have the breather, any ideas ?
Alloy rocker cover with breather
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Maniac
- Posts: 10767
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Alloy rocker cover with breather
Most of the alloy rocker covers have a boss which can be drilled and a union fitted.
http://www.minispares.com/product/Class ... o%20search
The boss ready for drilling can be seen just above right of the filler aperture.
http://www.minispares.com/product/Class ... o%20search
The boss ready for drilling can be seen just above right of the filler aperture.
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: Alloy rocker cover with breather
Most alloy covers are painfully thin. I drilled one out to 1/2 BSP and put a very thin nut on either side. That Lumiweld stuff might be a better option.
Cardiff, UK