Torque shaft

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
darranlatham
Minor Friendly
Posts: 19
Joined: Thu Jan 16, 2020 10:55 am
MMOC Member: Yes

Torque shaft

Post by darranlatham »

On the torque shaft aft end there is is and plate with six holes, I understand the holes adjust the height but why have the six holes and where to start for adjustment.
taupe
Minor Legend
Posts: 1188
Joined: Sun Oct 26, 2008 3:20 pm
Location: Bucks
MMOC Member: No

Re: Torque shaft

Post by taupe »

The holes are for micro adjustment of the ride height (vernier adjustment they call it)

Main adjustment is by moving around the arm on the splines after safely relieving the tension.....its all in the manual......including a suggested initial setting

Do you have uneven ride height?


Taupe
Post Reply