Thanks for all the previous general info.
Whats the differance between 25D and 45D dizzys,
I obtained a ALDON electronic ignition, cheap, for a 45D, it fits my 1098 and appears to work ok.
If you set the static timing at 5 degrees BTDC what would expect the strobe timing to be at tick over, and what advance you would expect at max revs.
See pic of mod to timing marks, makes it easier to see, I had to remove the fan blade, I could not stand the noise of it hitting my fingers.
You have to get very near with my strobe as its nearley as old as the car, works best in low light, pardon the pun<br><br>
dizzy info
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
dizzy info
South Yorkshire
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
I removed the existing cover set screw, and fitted a 5/16" UNF x 2" set screw from behind, and then fitted a nut and spring washer to secure the cover, long series socket helps. then just used 2 nuts and washers to secure the flat bar. Bend up the end of the flat bar to follow the radius of the pulley.
South Yorkshire
Got to be the answer! Since the eyes went a bit downhill, I find it very difficult to look at anything "standing on my head", as the glasses fall off with gravity Having said that, once the engine is running I go more by ear than degrees. But that position will be great for checking the auto advance with a strobe, must do soon(add to longgggg list of "to-do's"!)