Rear light wiring confusion!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Rear light wiring confusion!
Hi all, I’m re wiring the rear lights on my 1970 saloon and have lost the pictures I took of connections before I stripped it down! I’ve added pictures but could use any help. At the moment I’ve got the blacks from each side together for earth, green and white from loom to green right side. Green/red from loom to left side green/red. Green/purple from loom to green/purple right then over to green/purple left which seems to leave 2 reds from loom and a red from each side unconnected? Any advice appreciated....
- Attachments
-
- 0A698702-9CC2-47FC-86FF-2F10C2FC581E.jpeg (2.82 MiB) Viewed 2871 times
-
- 5D341832-94C0-4117-9963-9AB1E733CE75.jpeg (4.34 MiB) Viewed 2871 times
-
- Minor Fan
- Posts: 434
- Joined: Wed Jun 07, 2017 11:37 pm
- Location: Carmarthenshire
- MMOC Member: No
Re: Rear light wiring confusion!
You need a double bullet connector to join the reds together that supply the side/tail and number plate light.
https://www.morrisminorspares.com/elect ... ch-p829846
Whilst your at it get one for the brake light wires, and fit grommets to all holes in body that wires pass through.
Make sure all connectors are pushed fully home, don't want them sorting to earth
Regards John
https://www.morrisminorspares.com/elect ... ch-p829846
Whilst your at it get one for the brake light wires, and fit grommets to all holes in body that wires pass through.
Make sure all connectors are pushed fully home, don't want them sorting to earth
Regards John
Last edited by StillGotMy1stCar on Sun Sep 08, 2019 1:17 pm, edited 1 time in total.
-
- Minor Maniac
- Posts: 10843
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rear light wiring confusion!
These are the connector pliers you need to ensure that the nipple is fully home in the connector body
https://www.ebay.co.uk/itm/RIPAULTS-PAT ... SwSjpcrNL1
and this is the tool you need for clamping the Ripaults bullet connector to the wire
https://www.ebay.co.uk/itm/Ripaults-SSC ... SwxKBdHGxA
https://www.ebay.co.uk/itm/RIPAULTS-PAT ... SwSjpcrNL1
and this is the tool you need for clamping the Ripaults bullet connector to the wire
https://www.ebay.co.uk/itm/Ripaults-SSC ... SwxKBdHGxA
Re: Rear light wiring confusion!
Thanks as always chaps, everything is working now except indicators front and back so need to trouble shoot them!
- geoberni
- Minor Legend
- Posts: 3613
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Rear light wiring confusion!
I got a pack of 10 from Fleabay for £2.29 inc shipping... which is approximately half what 2 will cost from the Motoring suppliers.StillGotMy1stCar wrote: ↑Sun Sep 08, 2019 12:52 pm You need a double bullet connector to join the reds together that supply the side/tail and number plate light.
https://www.morrisminorspares.com/elect ... ch-p829846
Whilst your at it get one for the brake light wires, and fit grommets to all holes in body that wires pass through.
Make sure all connectors are pushed fully home, don't want them sorting to earth
Regards John
Plenty of choice for electrical terminations on there. I'd never get that sort of stuff from the specialist car places.
Just search for "DOUBLE BULLET CONNECTORS"
Basil the 1955 series II
-
- Minor Fan
- Posts: 434
- Joined: Wed Jun 07, 2017 11:37 pm
- Location: Carmarthenshire
- MMOC Member: No
Re: Rear light wiring confusion!
Thanks Berni, I only added the link as an example.
-
- Minor Maniac
- Posts: 10843
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rear light wiring confusion!
As Phil hints, you get what you pay for.
-
- Minor Fan
- Posts: 319
- Joined: Tue Jan 29, 2019 9:37 am
- MMOC Member: Yes
Re: Rear light wiring confusion!
Do the Ripaults bullets have a brass contact in them?
-
- Minor Maniac
- Posts: 10843
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rear light wiring confusion!
The Ripault male/bullet connectors are soft brass. The bullets fit into a spring steel (generic term) tube.
You can get Ripault connect suitable for soldering which are not brass but more of a white metal (generic term).
I use the brass Ripault connectors but I also solder them to the wire so as to get the best current transfer connection.
You can get Ripault connect suitable for soldering which are not brass but more of a white metal (generic term).
I use the brass Ripault connectors but I also solder them to the wire so as to get the best current transfer connection.
-
- Minor Fan
- Posts: 319
- Joined: Tue Jan 29, 2019 9:37 am
- MMOC Member: Yes
Re: Rear light wiring confusion!
That explains the extra cost, worthwhile though.
- geoberni
- Minor Legend
- Posts: 3613
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Rear light wiring confusion!
Don't doubt it , I just wouldn't like someone to go to a lot of expense when a little looking around will find alternatives.StillGotMy1stCar wrote: ↑Sun Sep 08, 2019 10:35 pm Thanks Berni, I only added the link as an example.
I stocked up on several little packs of bullets, spades and rings in different sizes at an autojumble when I first got Basil.
The one thing I didn't get was some of those splitter connectors, then had a need for a couple, hence resorting to Fleabay .
These days with the global manufacturing economy it's hard to tell what's made where by whom. If you look at the Ripca/Ripaults website (and a warning here, my Browser didn't like me going there as it said their security certificate is out of date) their standard crimping tool for insulated crimps is nothing special.
I take it, going from the link you posted for the old crimping tool, that original equipment crimps were the uninsulated brass ones?
I've just spent around 20 minutes (I should get a life ) looking at the Ripca website and although they still have an updated version of the tool you linked to, they don't seem to list that type of terminal any longer. Perhaps they don't supply them any longer...
https://www.ripca.com/nl_en/assembly-ma ... mping.html
It's weird, because although the tool is there, if you search under the 5 categories of Tool Type on the left hand side, it doesn't appear under any of those categories.....
Searching for Brass Bullet, or even Brass Male don't return any of that type.
Basil the 1955 series II
-
- Minor Maniac
- Posts: 10843
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rear light wiring confusion!
The Ripault crimping pliers and the Ripault bullet inserting pliers are not insulated and never have been. I have both and have had them many years.
Whilst the crimping tool is nothing special it does work and it does command a premium price even S/H.
Looking at the Ripaults web site both crimper and pliers are available but the pliers are of a different design to the original.
The insulated connectors are listed but have yet to find the bullet connectors.
Bullets of varying sizes and suitable for crimping are available from:
https://www.holden.co.uk/p/bullet_termi ... _mm_17_amp
There are brass crimping bullets and non crimping brass bullets only the crimping brass bullets work effectively with the crimping tool. Non crimping brass bullets either deform of break in two when compressed by the crimping pliers.
The Ripault brass bullets are not insulated but the connectors are insulated with a rubber sleeve over the metal connector body.
Whilst the crimping tool is nothing special it does work and it does command a premium price even S/H.
Looking at the Ripaults web site both crimper and pliers are available but the pliers are of a different design to the original.
The insulated connectors are listed but have yet to find the bullet connectors.
Bullets of varying sizes and suitable for crimping are available from:
https://www.holden.co.uk/p/bullet_termi ... _mm_17_amp
There are brass crimping bullets and non crimping brass bullets only the crimping brass bullets work effectively with the crimping tool. Non crimping brass bullets either deform of break in two when compressed by the crimping pliers.
The Ripault brass bullets are not insulated but the connectors are insulated with a rubber sleeve over the metal connector body.
-
- Minor Addict
- Posts: 784
- Joined: Fri Sep 24, 2004 9:09 pm
- Location: Hurstbourne Tarrant, Andover, Hants.
- MMOC Member: Yes
Re: Rear light wiring confusion!
The Ripault stuff seems expensive: I hope its good!
Last night I soldered some bullets to wires and then attempted to put them into the connectors - and blow me they wouldn't go in! I had to file them down to fit, a long and tedious business. They came from either ESM or Bull Motif many years ago so there's no going back to get them sorted. Does anyone know of cheaper ones than Ripault that actually go together smoothly? All my old ones on the car (i.e. 1963 vintage) come apart without difficulty even after all these years (after a squirt of thin oil) and go together when cleaned and greased smoothly and tightly without the need of a special tool.
Corr! MikeN.
Last night I soldered some bullets to wires and then attempted to put them into the connectors - and blow me they wouldn't go in! I had to file them down to fit, a long and tedious business. They came from either ESM or Bull Motif many years ago so there's no going back to get them sorted. Does anyone know of cheaper ones than Ripault that actually go together smoothly? All my old ones on the car (i.e. 1963 vintage) come apart without difficulty even after all these years (after a squirt of thin oil) and go together when cleaned and greased smoothly and tightly without the need of a special tool.
Corr! MikeN.
Morris Minor, the car of the future. One day they will all look like this!
- geoberni
- Minor Legend
- Posts: 3613
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Rear light wiring confusion!
As far as I'm aware, even the 'correct' female receptacle for the solid brass male bullet would be a sprung design, so a little careful tweaking with a small screwdriver should've opened it up to insert the bullet.
The thing with soldering them is that you have to be extremely careful not to get any solder on the outside surface. In my far younger days, I've worked with very similar connectors on aircraft that were 40's/50's designs and I speak from experience!
Basil the 1955 series II