Evening all,
Does someone please have a picture or diagram of a full wiring loom they could send me or point me in the right direction were I can find one. I have come across a black and white illustration but I was looking for a colour illustrated one.
Thanks in advance.
Wiring Loom
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 13
- Joined: Thu Jun 18, 2020 10:34 pm
- MMOC Member: Yes
Re: Wiring Loom
Have you seen the diagram posted in the electrical section, if not it’s under topics. 3rd post down. Give it time to load.
-
- Minor Friendly
- Posts: 13
- Joined: Thu Jun 18, 2020 10:34 pm
- MMOC Member: Yes
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Wiring Loom
Hi,
I used the black and white wiring diagram in the workshop manual.
Section N: Page N.22: At the bottom there is a numerical key to the cable colours, which you can cross reference to the wiring diagram relating to your model.
I used a highlighter to highlight the parts name (headlamp, sidelamp, dynamo etc.) and the colour number (different colour highlighter),
I then found the diagram easy to cross reference.
Good luck with your rewire.
Best wishes,
Mike.
I used the black and white wiring diagram in the workshop manual.
Section N: Page N.22: At the bottom there is a numerical key to the cable colours, which you can cross reference to the wiring diagram relating to your model.
I used a highlighter to highlight the parts name (headlamp, sidelamp, dynamo etc.) and the colour number (different colour highlighter),
I then found the diagram easy to cross reference.
Good luck with your rewire.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
Re: Wiring Loom
As Mike has pointed out the manual diagram is easy to follow. The diagram I posted is for a 1098cc Minor so it should be ok for a 68 model.
-
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: Wiring Loom
Good idea Jagnut