The interior light in my '65 Traveller works via the door switches but not via the built in switch.
The problem is that the black wire is not earthed and I cannot find where it is (or should be) connected to the body. The live feed and switch wires run down the screen pillar but the black wire does not follow this route.
Can anyone shed light on where the earth connects to the body?
Traveller Interior Light
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 38
- Joined: Fri Jul 23, 2021 5:11 pm
- MMOC Member: No
-
- Minor Legend
- Posts: 2752
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Traveller Interior Light
I think mine earthed to one of the long bolts joining the steel cab roof to the rear. It won't matter what you earth it to as long as it IS earthed .
-
- Minor Friendly
- Posts: 38
- Joined: Fri Jul 23, 2021 5:11 pm
- MMOC Member: No
Re: Traveller Interior Light
Thanks, ManyMinors.
I do realise that any earth position would
I am simply trying to work out how best to solve this without disturbing the roof lining too much.
Jim
I do realise that any earth position would
I am simply trying to work out how best to solve this without disturbing the roof lining too much.
Jim