1950 MM gearbox part wanted.

for those with Series MM sidevalve cars produced between September 1948 and February 1953
smithskids
Minor Addict
Posts: 626
Joined: Wed Sep 05, 2012 9:32 pm
MMOC Member: Yes

1950 MM gearbox part wanted.

Postby smithskids » Thu Apr 15, 2021 7:16 pm

Had to be towed home on Tuesday, gearbox had reverse and neutral!. Took box out yesterday and 3rd and 4th gear selector had broken in two. Looking for selector, part number x15634. item 82 on parts list plate C. This is on the central selector shaft at the back end of the box. Thanks in advance . Iain.

sirrom918
Minor Friendly
Posts: 42
Joined: Tue Jan 17, 2017 5:45 pm
MMOC Member: No

Re: 1950 MM gearbox part wanted.

Postby sirrom918 » Mon Apr 19, 2021 1:31 pm

Iain, the same gear selector 4th and 3rd - part number X15634 is used in the 1939 to 1948 Morris 8 Series E four speed boxes.

smithskids
Minor Addict
Posts: 626
Joined: Wed Sep 05, 2012 9:32 pm
MMOC Member: Yes

Re: 1950 MM gearbox part wanted.

Postby smithskids » Tue Apr 27, 2021 10:36 am

Thanks sirrom918, been a bit busy but got one from a friend all fitted and back on the road again. busy machining one from solid steel bar, should be finished tomorrow. Funny the other selectors are cast iron except the reverse one and 3/4th alloy with steel insert. on MMs and series Es.

smithskids
Minor Addict
Posts: 626
Joined: Wed Sep 05, 2012 9:32 pm
MMOC Member: Yes

Re: 1950 MM gearbox part wanted.

Postby smithskids » Tue May 04, 2021 7:32 pm

Pictures of new and old selectors
Attachments
mmgearbox.jpg
Fits well and works
mmgearbox.jpg (3.67 MiB) Viewed 311 times

smithskids
Minor Addict
Posts: 626
Joined: Wed Sep 05, 2012 9:32 pm
MMOC Member: Yes

Re: 1950 MM gearbox part wanted.

Postby smithskids » Tue May 04, 2021 7:35 pm

selector.jpg
selector.jpg (2.62 MiB) Viewed 311 times

philthehill
Minor Maniac
Posts: 8800
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: Yes

Re: 1950 MM gearbox part wanted.

Postby philthehill » Wed May 05, 2021 12:43 pm

That is a nice piece of machining - well done. 8)



Who is online

Users browsing this forum: No registered users and 2 guests