Valve colletts
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 25
- Joined: Sat Oct 06, 2007 5:32 pm
- Location: Southampton, UK
- MMOC Member: No
Valve colletts
We managed to lose 1 valve collett, help!!!!!!!!! Can you buy these?
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
Have you tried dimming the lights and pointing a torch flat on the floor? That sometimes helps to show up tiny lost objects by making them cast a long shadow.
Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
- Minor Friendly
- Posts: 25
- Joined: Sat Oct 06, 2007 5:32 pm
- Location: Southampton, UK
- MMOC Member: No
All great ideas, my wife found one in the fluff from the tumble dryer, but still one missing. I will ask her to keep searching which is not so easy when it is my car and I am in Hong Kong. I'll be home in 2 weeks and hoping to get the engine purring
Q. Are these colletts the same across all moggy engines? Someone asked me the question in the 'wanted' section about A-frame engines colletts?<br><br>
Q. Are these colletts the same across all moggy engines? Someone asked me the question in the 'wanted' section about A-frame engines colletts?<br><br>
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
You should enter the photo contest with that picture!dplant_uk wrote:<br>
http://www.morrisminoroc.co.uk/index.ph ... &start=630
Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
-
- Minor Friendly
- Posts: 25
- Joined: Sat Oct 06, 2007 5:32 pm
- Location: Southampton, UK
- MMOC Member: No
Valve collett
Thanks, I'll give him a call.kennatt wrote:I;m about 100% certain that if you ring chris at tom roys he will have loads laid about his workshop it's full of bits and pieces ,would be supprised if he can't help out.