What would that be?

for those with Series MM sidevalve cars produced between September 1948 and February 1953

Moderator: Moderators

RobThomas
Minor Legend
Posts: 2142
Joined: Thu May 11, 2006 10:34 am
MMOC Member: No

Re: What would that be?

Postby RobThomas » Thu Aug 11, 2016 12:13 pm

There are no kits, you just buy the bits you want to change.

http://www.morrisminorspares.com/

pradeepprabhua
Minor Friendly
Posts: 94
Joined: Fri Feb 25, 2011 2:34 pm
MMOC Member: No

Re: What would that be?

Postby pradeepprabhua » Wed Aug 31, 2016 10:49 am

Hi,
Got the following items from the Spares man Mr Bryan.

Wiper motor, mount and brackets SH
Wiper drive cable, wheel boxes etc SH
Wiper arms black 2 no's
Rear brake cylinders Lockheed 2 No's
2 carbon brushes and springs for the distributor.

They shall be reaching here tomorrow.
[*]Pradeep Prabhu[*]
1951 Series MM - 2door - side valve head


pradeepprabhua
Minor Friendly
Posts: 94
Joined: Fri Feb 25, 2011 2:34 pm
MMOC Member: No

Re: What would that be?

Postby pradeepprabhua » Sun Aug 20, 2017 2:31 pm

What is the nut thread size for the oil bath filter. Need to but a nut .
picture is as shown below.
Attachments
IMG_4674.JPG
IMG_4674.JPG (142.67 KiB) Viewed 793 times
[*]Pradeep Prabhu[*]
1951 Series MM - 2door - side valve head


RobThomas
Minor Legend
Posts: 2142
Joined: Thu May 11, 2006 10:34 am
MMOC Member: No

Re: What would that be?

Postby RobThomas » Tue Aug 22, 2017 11:54 am

That filter only went to 'Export' countries so we don't have them in the UK. Can you measure the thickness of the metal rod and see how many turns of thread there would be in one inch of rod?

TvdWerf
Minor Addict
Posts: 543
Joined: Wed Jul 28, 2010 9:39 am
MMOC Member: No

Re: What would that be?

Postby TvdWerf » Wed Sep 20, 2017 9:08 am

I checked it on my filters, it looks like 5 mm, but the metric 5 tapped does not go in the nut for more than a few windings.
So it must be the BSF thread , possible 3/16 " ?
MM '51 LHD sidevalve

philthehill
Minor Maniac
Posts: 5071
Joined: Thu Jul 19, 2012 12:05 pm
MMOC Member: No

Re: What would that be?

Postby philthehill » Wed Sep 20, 2017 10:47 am

The part number for the air cleaner wing nut is AAA3936 / 184825 (MOSS).
A plain washer and a spring washer is also fitted and are installed under the wing nut - plain washer against the top of the filter.
I would suggest that the wing nut required is 1/4" UNF or at most 5/16" UNF.



Who is online

Users browsing this forum: No registered users and 2 guests