distributor cotterpin bolt
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
distributor cotterpin bolt
Does any one know if the cotterpin bolt for the distributor is the same as a bicycle cotterpin bolt as I sheared the one on my sidevalve. If not can I get a replacement or do I have to weld thread back on and recut thread
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: distributor cotterpin bolt
No, a cycle cotter bolt is tapered, a dist. bolt is curved the same profile as the dist. hole.
Get some made and use a larger threaded section 5/16 UNF thread (9/16 A/F nut) . The nut can be done/undone with 9/16 socket or ring spanner. It works for me. Sell the extras to cover your costs
Get some made and use a larger threaded section 5/16 UNF thread (9/16 A/F nut) . The nut can be done/undone with 9/16 socket or ring spanner. It works for me. Sell the extras to cover your costs
[sig]3580[/sig]
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
Re: distributor cotterpin bolt
Thanks I will have a go at welding this weekend if its not sucessful i will be in touch.
I may order a spare just in case
Ian
I may order a spare just in case
Ian
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: distributor cotterpin bolt
I am investigating the production of a small batch of cotter pins which clamp the distributor on the USHM3 engine. They will be produced from 3/8 Unf bolts which means that the threaded section will be 3/8 Unf and the nut will be 9/16 A/F which will the overcome the occassional problem of the thread stripping or breaking.
I have been using a modified cotter pin for many years without any problems and a 9/16 A/F ring spanner is a good fit for tightening or slackening the bolt.
If anyone is interested let me know so that I can estimate the quantity required
I have been using a modified cotter pin for many years without any problems and a 9/16 A/F ring spanner is a good fit for tightening or slackening the bolt.
If anyone is interested let me know so that I can estimate the quantity required
[sig]3580[/sig]
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
Re: distributor cotterpin bolt
I welded mine but I would still be interested in one as a spare so put me down for one please mike
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: distributor cotterpin bolt
I now have a few distributor cotterpin bolts for the USHM3 engine. They are zinc plated high tensile steel with 3/8 UNF thread, 9/16 A/F nut and spring washer
[sig]3580[/sig]
-
- Minor Fan
- Posts: 180
- Joined: Wed Aug 10, 2011 3:52 pm
- Location: Pembrokeshire
- MMOC Member: Yes